Description
Straight-wall pistol brass like the .45 ACP takes three separate dies to reload right, and this Redding Series-A set covers every step. Unlike bottleneck cartridges, a straight case can't be full-length sized and have its neck expanded in a single pass, so Redding splits the work across a full length resizing die, an expander die, and a bullet seating die. Dial them in once on your press and you're set up to crank out consistent, accurate .45 ACP or .45 Auto Rim loads.
The full length resizing die handles the case body and carries a decapping rod assembly, so it knocks out the spent primer while it brings the brass back to spec. The expander die opens the case mouth just enough with its neck expanding plug, giving your bullet a clean start and helping prevent shaving or crushed cases. The seating die finishes the job with a bullet guide, a built-in crimp ring, and the proper seating plug, letting you set bullet depth and apply a taper crimp in one motion.
What Sets the Redding 80189 Die Set Apart
Redding builds these from quality alloy steel, machined on Hardinge Super-Precision lathes that hold some of the tightest tolerances in the business, then heat treats them in controlled furnaces and hand polishes each die for smooth operation. The company guarantees its dies will produce ammunition that fits any standard SAAMI chamber regardless of your pistol or revolver's action type. The bodies use the industry standard 7/8-14 thread, so they drop into any common single stage or turret press.
Built for .45 ACP and .45 Auto Rim Handloaders
Folks who shoot a lot of .45, whether it's range plinking, bullseye, or cowboy and Wild Bunch matches, tend to appreciate how tight the adjustment screws stay once they're dialed in. Set them for your press and they hold position round after round. Reloading your own .45 brass pays for the gear quick once you're running volume, and this set is a dependable backbone for that bench.
Worth noting: the die box itself doubles as a handy cartridge loading block and storage case. A shell holder is not included, so grab the correct one for your press if you don't already have it on hand.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 80189
- UPC: 611760801891
- Caliber: .45 ACP / .45 Auto Rim
- Set Type: Series-A Full Length 3-Die Set (Straight-Wall)
- Dies Included: Full Length Resizing Die, Expander Die, Seating Die
- Material: Alloy / Case Hardened Steel
- Thread: 7/8-14 (industry standard)
- Country of Origin: USA
- Shipping Weight: 1.2813 lbs
What’s Included
- Full Length Resizing Die (with decapping rod assembly)
- Expander Die (with neck expanding plug)
- Bullet Seating Die (with bullet guide, built-in crimp ring, and seating plug)
- Plastic die storage box that doubles as a cartridge loading block
Frequently Asked Questions
Does this Redding 80189 die set work for both .45 ACP and .45 Auto Rim?
Yes. Redding builds the 80189 set to handle both .45 ACP and .45 Auto Rim straight-wall cases. The same three dies cover sizing, expanding, and seating for either cartridge.
Why does the .45 ACP set come with three dies instead of two?
Straight-wall cases can't be full-length sized and have their mouths expanded in a single operation the way bottleneck rifle brass can. That's why Redding includes a separate expander die along with the resizing and seating dies. It's standard practice for straight-wall pistol calibers.
Is a shell holder included with the Redding Series-A 45 ACP die set?
No, a shell holder is not included and will need to be purchased separately. Pick the correct shell holder for .45 ACP based on your press. Most presses use the same common size, so match it to your setup.
Will these Redding dies fit my reloading press?
They use the industry standard 7/8-14 threaded bodies, so they'll thread into virtually any common single stage, turret, or progressive press. Redding also guarantees the dies will produce ammo that fits any standard SAAMI chamber regardless of action type.





Reviews
There are no reviews yet.