Description
The Redding Premium Full Length 2-Die Set for .260 Remington takes the proven Series A sizing and seating dies and bumps them up with two upgrades that serious handloaders tend to add anyway. You get a carbide size button in the full length sizing die and a Bullet Seating Micrometer on the seating die. That means less drag when the expander pulls back through the case neck and seating depth adjustments you can dial in, write down, and come back to later. If you load more than one bullet in your .260, that micrometer head is worth its weight.
What Sets the Premium .260 Rem Die Set Apart
The carbide size button is the quiet hero here. Standard steel expanders can scuff and grab as they come back through the neck, which adds wear and can nudge your case out of line. The carbide button slides easier, reduces case stretch, and holds its dimensions longer. On the seating side, the micrometer adjusts in .001 inch increments with a full revolution covering .050 inch, so you can fine tune bullet jump and repeat a setting precisely instead of guessing with a locknut.
How the Micrometer Seater Works in This Redding Set
Worth noting so you know exactly what you are getting: this is a standard seating die fitted with the upgraded micrometer head, not the Redding Competition seating die with the sliding sleeve. It still gives you clean, repeatable seating depth control at a price that makes sense for most .260 Rem reloaders chasing consistency in their handloads.
Both dies use the industry standard 7/8-14 thread, so they drop into any common single stage or turret press. Redding hand polishes and inspects these dies before they ship, and the whole set tucks into a plastic storage box to keep everything organized on the bench. The .260 Remington is a flat shooting, mild recoiling round built on the .308 case necked down to 6.5mm, and dies like these are a big part of wringing the accuracy that cartridge is known for out of your rifle.
Key Specifications
- Caliber: .260 Remington
- Set Type: Premium Full Length 2-Die Set
- Dies Included: Full length sizing die, micrometer seating die
- Sizing Die Feature: Carbide size button
- Seating Die Feature: Bullet Seating Micrometer (.001 in increments)
- Thread Size: 7/8-14
- Manufacturer: Redding
- Manufacturer Part Number: 66531
- UPC: 611760665318
- Shipping Weight: 1.34 lbs
What’s Included
- Full length sizing die with carbide size button
- Seating die with Bullet Seating Micrometer
- Spare decapping pin
- Hex wrench
- Plastic storage box
Frequently Asked Questions
Does the Redding Premium .260 Rem die set come with a shellholder?
No, the shellholder is sold separately, which is standard for Redding die sets. You will want a shellholder sized for the .260 Remington case head, which shares the same head dimensions as the .308 family. Grab one to match your press if you do not already have it.
Is the seating die in this set the Redding Competition seating die?
It is not. This Premium set uses a conventional seating die fitted with Redding's upgraded Bullet Seating Micrometer head. It gives you precise, repeatable seating depth control, but it does not have the sliding sleeve found in the Competition seating die.
What does the carbide size button do on the full length sizing die?
The carbide size button handles the neck expansion as the case is drawn back out of the sizing die. Compared to a standard steel button, carbide slides more smoothly, resists wear, and helps reduce case stretching for more consistent case dimensions over time.
Will these dies fit my press?
Yes, both dies use the industry standard 7/8-14 thread, so they thread right into any common single stage, turret, or progressive press. No special adapters needed. Just add the correct shellholder for your .260 Rem brass.




Reviews
There are no reviews yet.