Description
Neck tension is one of those little details that separates good handloads from great ones, and this .309" Redding bushing gives you precise control over it. It's machined from heat-treated steel and finished with a titanium nitride coating that bumps up the surface hardness and cuts sizing friction, so the brass passes through smoothly and your necks stay clean. With the neck lubed, it leaves no marks behind.
How the .309" Redding Bushing Fits Your Setup
This bushing shares the standard Redding external dimensions of 1/2" outside diameter by 3/8" long, so it drops straight into any Redding bushing-style neck sizing or Type S sizing die. It's clearly marked with the .309" size I.D. so you always know which one you're grabbing. Because it isn't fixed in place, the bushing self-centers on the case neck, which helps keep runout low and concentricity tight.
Picking the Right Titanium Nitride Bushing Size
Sizing selection is simple once you know the trick. Measure the outside neck diameter of a loaded round, then subtract the amount of neck tension you want, usually somewhere in the .002" to .003" range depending on your cartridge and whether you're feeding from a magazine or single loading. The remaining number is your bushing size. Since Redding offers these in .001" increments across the full range, a lot of reloaders keep one on each side of their target so they can fine-tune tension while working up a load.
Why Reloaders Reach for the TiN Version
The titanium nitride treatment is the same heat-treated steel core with an added surface coating that handles the friction and wear of repeated sizing. For folks running a bushing through hundreds of cases, that slick, hard finish makes a real difference in how effortless the stroke feels. It's a small part that punches well above its size when you're chasing consistency on paper.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76309
- UPC: 611760763090
- Bushing Diameter: .309 inch
- Material: Heat-treated steel with titanium nitride coating
- Finish: Titanium Nitride (TiN)
- External Dimensions: 1/2" O.D. x 3/8" long
- Size Increments: .001 inch
- Compatibility: Redding bushing-style and Type S neck sizing dies
- Application: Rifle reloading
- Country of Origin: United States
What’s Included
- One (1) Redding .309" Titanium Nitride Neck Sizing Bushing
Frequently Asked Questions
What dies does the Redding .309" bushing fit?
It fits all Redding bushing-style neck sizing dies, including the Type S neck and full-length sizing dies. The bushing uses the standard 1/2" O.D. by 3/8" long dimensions, so it drops right in. These also interchange with L.E. Wilson style bushings.
How do I know if .309" is the right bushing size for me?
Measure the outside neck diameter of a loaded round with a bullet seated, then subtract your desired neck tension, commonly .002" to .003". The number you land on is your bushing size. Since brass neck thickness varies by headstamp, it's worth measuring your specific cases rather than assuming.
What's the advantage of the titanium nitride bushing over the plain steel one?
Both start as the same heat-treated steel, but the titanium nitride version adds a surface coating that increases hardness and reduces sizing friction. That makes the sizing stroke smoother and helps the bushing hold up over a lot of cases. With a lubed neck, it won't leave marks on your brass.
Does the Redding bushing control neck tension without an expander?
Yes, the whole point of a bushing die is to size the outside of the neck to a precise diameter, which sets your neck tension directly. Many reloaders remove the expander ball and let the bushing do the work for better concentricity. Keep in mind the bushing self-centers and won't size the very bottom of the neck by design.



Reviews
There are no reviews yet.