Description
Neck tension is one of those details that separates good handloads from great ones, and the Redding .283" Titanium Nitride Neck Sizing Bushing gives you precise control over it. This bushing works with Redding bushing-style neck sizing dies, letting you size just the neck of your brass to the exact amount needed to hold a bullet securely without over-working the metal. The result is more uniform bullet seating force, better case life, and the kind of repeatability that shows up on target.
What Sets the .283" TiN Bushing Apart
Underneath that gold-colored coating is heat-treated steel, hand polished to a surface hardness of Rc 60-62. What makes the titanium nitride version different from the plain steel bushings is the TiN surface treatment, which bumps up the effective surface hardness even further and slides the brass through with noticeably less friction. That added lubricity means smoother sizing strokes and less drag on the case neck.
Sizing and Fit for the Redding Neck Bushing
This bushing carries the standard Redding external dimensions of 1/2" O.D. by 3/8" long, so it drops freely into any Redding bushing-style neck sizing die. Redding offers these in .001" increments across the full range of .185" through .368", covering calibers from .17 all the way up to .338, and each one is clearly marked with its size on the face so you can grab the right one at a glance.
Picking the Right Size
To land on the correct bushing diameter, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002" to account for brass spring-back and the neck tension you want. If you shoot moly-coated bullets, you may want to go a touch tighter. Getting that measurement right is the whole point, since the bushing is what delivers consistent bullet retention without excessive resizing.
Key Specifications
- Diameter: .283"
- Material: Heat-treated steel with titanium nitride coating
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2" O.D. x 3/8" long
- Compatibility: Redding bushing-style neck sizing dies
- Caliber Range Covered (Series): .17 to .338
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 76283
- UPC: 611760762833
- Country of Origin: Made in USA
What’s Included
- One Redding .283" Titanium Nitride Neck Sizing Bushing (76283)
Frequently Asked Questions
What's the difference between the titanium nitride bushing and the plain steel version?
Both bushings start as the same heat-treated steel, hand polished to Rc 60-62. The titanium nitride bushing adds a TiN coating that increases the effective surface hardness even more and reduces sizing friction. In practice that means smoother sizing strokes and added lubricity on the case neck.
Will the .283" bushing fit my dies?
This bushing uses the standard 1/2" O.D. by 3/8" long dimensions and freely interchanges in all Redding bushing-style neck sizing dies. It also works in most popular bushing-style dies that share those external dimensions. The steel and TiN versions are physically interchangeable with each other.
How do I know if .283" is the right size for my brass?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002" to allow for brass spring-back and bullet tension. That number points you to your bushing size. If you load moly-coated bullets, you may want to step down a thousandth or two for a tighter neck.
Does using a neck sizing bushing help with case life?
Yes. Because you're only sizing the neck to the exact amount needed to hold the bullet, you avoid over-working the brass the way full-length sizing can. That translates to more consistent neck tension and longer case life, which is a big reason precision handloaders run bushing dies.




Reviews
There are no reviews yet.