Description
Redding's Large Universal Decapping Die does one job and does it cleanly: it punches out spent primers and clears the flash hole so your brass is ready for the next step. Because it only deprimes and doesn't touch the case walls, you skip the lube entirely and keep the process quick. A lot of handloaders run their brass through a dedicated decapping die like this before wet tumbling, so the primer pockets get scrubbed right alongside the cases. That extra step pays off when you're prepping big magnum and dangerous game brass.
What the Large 69200 Die Handles
This large die covers .25 through .50 caliber cases with lengths up to 3 inches, which puts cartridges like the .338 Lapua, .300 and .338 magnums, and the big .50 BMG class brass squarely in its wheelhouse. Worth knowing before you order: the large die won't accept a neck diameter under .25 caliber, and it won't take the optional 17 to 20 caliber rod. If you're working smaller stuff like .223 or .22-250, the small decapping die (69100) is the one you want instead.
Built Like Every Redding Die
Redding machines these from quality alloy steel on precision lathes, and the body wears the industry standard 7/8-14 thread so it drops into just about any press you already own, single stage, turret, or progressive. The slightly extended body gives the lock ring full thread engagement, which handloaders running progressives tend to appreciate. It's a simple tool with good fit and finish, the kind of piece you buy once and keep on the bench for years.
Keep in mind this is a depriming die only, so it does not resize any part of the case. You'll still run your brass through a sizing die when you're ready to load. Pairing a universal decapper with your sizing dies just lets you separate cleaning from sizing, which is how a lot of precision reloaders prefer to run their process.
Key Specifications
- Manufacturer: Redding
- Model: Large Universal Decapping Die
- Manufacturer Part Number (MPN): 69200
- UPC: 611760692000
- Die Type: Universal Decapping / Depriming Die
- Caliber Range: .25 through .50 caliber
- Maximum Case Length: 3.0 inches
- Thread Size: 7/8-14 (industry standard)
- Material: Alloy steel
- Case Lube Required: No
- Press Compatibility: Single stage, turret, and progressive
- Country of Origin: USA
What’s Included
- Redding Large Universal Decapping Die (69200)
- Storage box
Frequently Asked Questions
What calibers does the Redding Large Decapping Die cover?
The large 69200 die handles cases from .25 through .50 caliber with lengths up to 3 inches. That covers the big magnums and dangerous game cartridges like the .338 Lapua, .300 Win Mag, and .50 BMG class brass. If you need to deprime smaller cases like .223 or .22-250, you'll want the small decapping die (69100) instead.
Does this die resize the case or just remove the primer?
This is a depriming die only, so it knocks out the spent primer and clears the flash hole without touching the case walls. No part of the case is resized, which is why you don't need case lube to run it. You'll still use a separate sizing die when you're ready to load.
Will the Redding Large Decapping Die fit my press?
Yes, it uses the industry standard 7/8-14 thread, so it threads into virtually any single stage, turret, or progressive press. The body is slightly extended to give your lock ring full thread engagement, which helps on progressive setups.
Is a shellholder included with the 69200 die?
No, the shellholder is not included and is sized to your specific cartridge, so pick one up to match your brass. The die itself handles the depriming, while the shellholder holds the case in the press.





Reviews
There are no reviews yet.