0
0

Redding GRX Push Thru Base Sizing Die 40 S&W Steel 96040

UPC: 611760960406

$50.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a lot of .40 S&W through an autoloader, you've probably run into brass with a telltale bulge down near the base. That's the part of the case a standard sizing die just can't reach, and it's enough to make otherwise good brass useless. The Redding GRX Push Thru Base Sizing Die solves that exact problem by resizing the case from the web up, bringing it back within SAAMI spec so you can run it through your normal die and load it like nothing happened.

The idea is refreshingly simple. The kit includes a steel sizing die with a lock ring plus a shellholder pushrod that drops into your ram where a shellholder normally sits. You set the fired case on top of the pushrod, raise the ram, and the whole case gets forced completely through the die. As it exits, the bulge in the web is ironed out and the sized case is held in a rebated section up top for easy pickup.

How the GRX Push Thru Die Earns Its Keep

This is the steel version of the die, so a little case lube goes a long way. A light film around the base area with a Q-tip is plenty, and that's what keeps the push smooth. It takes a bit of muscle on the handle compared to a carbide setup, but it does the job completely and brings dead brass back to life. For folks who scrounge range brass or just hate tossing cases, this die pays for itself fast.

Setup Notes for the Redding GRX Die

Keep in mind this kit works on a single stage or turret press that accepts a standard shellholder, not a progressive. Once the brass has been pushed through, finish it up in your regular .40 S&W sizing die and load as usual. It's a straightforward add to the bench for anyone serious about getting the most out of their .40 brass.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 96040
  • UPC: 611760960406
  • Caliber: .40 S&W
  • Die Type: Push Thru Base Sizing Die
  • Die Material: Steel
  • Lube Required: Yes
  • Press Compatibility: Single stage or turret press with standard shellholder (not progressive)
  • Lock Ring: Included

What’s Included

  • Steel push thru base sizing die with lock ring
  • Shellholder pushrod

Frequently Asked Questions

What does the Redding GRX Push Thru die actually do?

It removes the bulge that forms near the base of fired .40 S&W cases, the part a normal sizing die can't reach. The case gets pushed completely through the die, which brings the web back within SAAMI spec. After that you can resize it in a standard die and load it like any other case.

Is this the steel die or the carbide version?

This is the steel GRX die, part number 96040. Because it's steel, you'll want a light coat of case lube around the base to keep the push smooth. Redding also offers a carbide version that doesn't need lube, but this steel model does the same job for less outlay.

Can I use the GRX die on a progressive press?

No, this kit is meant for a single stage or turret press that accepts a standard shellholder. The pushrod drops into the ram where a shellholder normally sits. A progressive won't work with this setup.

What comes in the box with the Redding GRX die?

The kit includes the steel push thru sizing die with its lock ring and the shellholder pushrod that seats in your press ram. That's everything you need to start reclaiming bulged brass with a compatible press.

Additional information

UPC

611760960406

Manufacturer

Manufacturer Part Number

96040

Reviews

There are no reviews yet.

Be the first to review “Redding GRX Push Thru Base Sizing Die 40 S&W Steel 96040”