Description
Redding has built its name on dies that just work, and the Full Length Sizing Die for .300 PRC is a perfect example. This single die handles the heavy lifting on the resizing side of your reloading process, squeezing the case body, shoulder, and neck back down to minimum SAAMI dimensions so your loaded rounds drop into any standard chamber without a fuss. It's the die precision long-range folks and big-game hunters reach for when they want their .300 PRC brass running consistently.
What the Redding .300 PRC Sizing Die Does
In one pull of the press handle, this die sizes the full length of the case and removes the spent primer thanks to the included decapping rod assembly with sizing button and decapping pin. The expander ball sets your neck diameter as the case comes back out, giving you the proper tension to hold a .308 bullet. Shoulder bump is controlled through die adjustment, so you can set your headspace to match your rifle and get that just-right fit.
Build Quality Behind the Redding Full Length Sizing Die
Redding machines these from fine alloy steel on super-precision lathes, then heat treats them in controlled furnaces to hold tolerances for the long haul. The sizing diameters are hand-polished to a surface hardness of Rc 60-62, which cuts down on sizing effort and keeps your strokes smooth even on magnum brass. Every die is hand polished, inspected, and ultrasonically cleaned before it ships, and the industry-standard 7/8-14 threaded body means it screws right into your single-stage or progressive press.
One thing worth knowing: Redding dies ship with a rust-preventative film from the factory, so wipe the inside clean with bore solvent before your first run. And don't skip the case lube on your .300 PRC brass. A thin, even coat keeps everything moving and keeps you from getting a case stuck in the die. Note that this is the standalone sizing die, so you'll want a seating die and the correct #6 shellholder to complete your setup.
Key Specifications
- Manufacturer: Redding Reloading
- Caliber: .300 PRC
- Die Type: Full Length Sizing Die (conventional)
- Manufacturer Part Number: 91776
- UPC: 611760917769
- Thread: 7/8-14
- Material: Heat-treated alloy steel
- Surface Hardness: Rc 60-62 (hand-polished sizing diameters)
- Bullet Diameter: 0.308
- Recommended Shellholder: #6 (sold separately)
- Country of Manufacture: U.S.A.
- Shipping Weight: 0.62 lb
What’s Included
- One Redding Full Length Sizing Die for .300 PRC
- Decapping rod assembly with sizing button and decapping pin
- Lock ring
- Instructions
Frequently Asked Questions
Does the Redding Full Length Sizing Die .300 PRC come with a shellholder?
No, the shellholder is not included with this die. For .300 PRC you'll want a #6 shellholder, which is sold separately. Grab one if you don't already have it in your kit so you're ready to size at the bench.
Will this die work in a progressive press?
Yes. It uses the industry-standard 7/8-14 threaded body, so it threads into single-stage and progressive presses alike. Plenty of reloaders run Redding full length sizers on progressives without trouble, just be sure to lube your brass well to avoid stuck cases.
Is this the Type S bushing die?
No, this is Redding's conventional Full Length Sizing Die (part 91776). It sizes the neck using an expander ball on the decapping rod rather than interchangeable bushings. If you want bushing-style neck tension control, that's the separate Type S model.
Does the Redding .300 PRC sizing die remove the spent primer?
Yes. The included decapping rod assembly knocks out the spent primer in the same stroke that sizes the case. It's a two-jobs-in-one setup, so you size the full length of the brass and deprime at once.





Reviews
There are no reviews yet.