Description
The 6mm Dasher has earned its reputation as one of the most accurate cartridges built on the 6BR case, and the handloading end of that equation matters just as much as the barrel. This Redding Full Length Die Set gives you the two dies that do the everyday work: a full-length sizing die and a bullet seating die, both cut to Redding's tight standards so your loaded rounds chamber clean and shoot consistent.
The full-length sizing die resizes the entire case body and bumps the shoulder back so the round drops into any standard chamber without fuss. It comes with a decapping rod assembly that carries a neck expander size button and a decapping pin, so you knock out spent primers and set your neck in one pull of the handle. The seating die includes a bullet guide, a seating plug, and a built-in crimp ring if you ever want to add a crimp, though plenty of Dasher reloaders run these uncrimped for precision work.
Why the Redding 6mm Dasher Die Set Earns Its Keep
Redding machines these dies on precision lathes and heat treats them in controlled furnaces, then hand polishes and ultrasonically cleans each one before it goes in the box. That attention is a big reason Dasher shooters trust Redding at distance. The 6mm Dasher is a fire-formed 6BR with the shoulder blown forward and set to a 40 degree angle, which opens up case capacity and makes it a favorite out to 1000 yards in benchrest and PRS circles.
Setting Up Your Redding Dasher Dies
Both dies use the industry standard 7/8-14 threaded body, so they thread right into any common single stage or turret press. The die box doubles as a loading block and has a spot to stash your shellholder, along with a spare decapping pin and a hex wrench tucked inside. Keep in mind the shellholder is sold separately, so grab a #1 shellholder if you don't already have one on the bench.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 80648
- Model Number: 80648
- UPC: 611760806483
- Caliber: 6mm Dasher
- Bullet Diameter: .243
- Die Type: Full Length 2-Die Set
- Dies Included: Full Length Sizing Die, Bullet Seating Die
- Thread Size: 7/8-14
- Recommended Shellholder: #1 (sold separately)
- Country of Origin: Made in USA
- Shipping Weight: 1.18 lbs
What’s Included
- One full length sizing die with decapping rod assembly, neck expander size button, and decapping pin
- One standard bullet seating die with seating plug and built-in crimp ring
- Spare decapping pin
- Hex wrench
- Die box with loading block and shellholder storage
Frequently Asked Questions
Does the Redding 6mm Dasher die set come with a shellholder?
No, the shellholder is sold separately. The 6mm Dasher uses a #1 shellholder, so pick one up if you don't already have it on your bench. The die box does include a dedicated spot to store the shellholder once you have it.
What dies are in this Redding Full Length set?
You get two dies: a full length sizing die and a bullet seating die. The sizing die resizes the full case body, bumps the shoulder, and deprimes using the included decapping rod and size button. The seating die has a bullet guide, seating plug, and a built-in crimp ring for those who want to add a crimp.
Will these dies fit my press?
Yes. Both dies use the industry standard 7/8-14 thread, so they thread into virtually any common single stage, turret, or progressive press.
Can I form 6mm Dasher brass with this set?
Dasher brass is typically made by fire-forming 6mm BR cases in a Dasher chamber, where the shoulder blows forward to the 40 degree Dasher profile. This full length set handles the sizing and seating of your formed Dasher brass. You can also buy pre-formed Dasher brass to skip the fire-forming step.




Reviews
There are no reviews yet.