Description
If you've ever reloaded both Special and Magnum cases on the same dies, you know the dance of loosening the lock ring, re-adjusting, and hoping you land back where you started. The Redding Die Spacer Kit takes that guesswork off the table. It's a small three-piece set that drops onto your die threads so you can change die height in a repeatable way, no re-zeroing required.
What the Redding Die Spacer Kit Actually Does
The kit ships with three spacers, each a different thickness for a different job. There's a .062 spacer for making a no-crimp adjustment or doing partial resizing, a .125 spacer sized for .44 Special and .44 Magnum work, and a .135 spacer for .38 Special and .357 Magnum. Slide the right one in and your die sits at the correct height for that case length. Pull it back out and you're right back to your original setting with the lock ring untouched.
The no-crimp spacer is worth calling out on its own. Redding's own crimp die instructions point folks toward this kit, since the .062 spacer gives you roughly that 1/16 inch of lift needed to back a seating die off the crimp ring. That's handy when you want to seat bullets first and crimp as a separate step with a taper or profile crimp die.
Fitment for the Redding Spacer Kit
These work with all 7/8-14 threaded dies and combination die sets, which covers the overwhelming majority of reloading dies on the market from Redding and other makers alike. There's nothing to install permanently and no extra tools needed, so it's an easy thing to toss in the die box and reach for when you switch between cartridges that share a die. For anyone loading revolver cartridges in pairs or fine-tuning a crimp, it's one of those cheap little pieces that earns its keep fast.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 80901
- UPC: 611760809019
- Type: Reloading Die Spacer Kit
- Pieces Included: 3 spacers
- No-Crimp / Partial Resize Spacer: .062
- .44 Spl / .44 Mag Spacer: .125
- .38 Spl / .357 Mag Spacer: .135
- Thread Compatibility: 7/8-14 threaded dies and combination die sets
What’s Included
- No-crimp or partial resizing spacer (.062)
- .44 Special / .44 Magnum spacer (.125)
- .38 Special / .357 Magnum spacer (.135)
Frequently Asked Questions
What dies will the Redding Die Spacer Kit fit?
The spacers are made for all 7/8-14 threaded dies and combination die sets, which is the standard thread used on the vast majority of reloading dies. That means they'll work with Redding dies as well as other common brands on your bench.
How does the Redding Die Spacer Kit help with no-crimp seating?
The .062 spacer gives you about a 1/16 inch of lift, which backs a seating die off the crimp ring so you can seat bullets without crimping them. Redding points to this exact kit in their own crimp die instructions for that purpose. It's ideal if you want to crimp as a separate step with a taper or profile crimp die.
Why use spacers instead of just adjusting the lock ring?
The spacers let you change your die height for a different case length or adjustment and then go right back to your original setting without ever loosening the lock ring. That keeps your zero intact and saves you from re-dialing the die every time you switch. It's a real time saver if you load both Special and Magnum cases with the same dies.
Which spacer do I use for .38 Special versus .357 Magnum?
The .135 spacer in this kit is the one sized for the .38 Special and .357 Magnum family, while the .125 spacer handles .44 Special and .44 Magnum. You slide in the spacer that matches your case length so the die seats at the right height for that round.




Reviews
There are no reviews yet.