Description
The Redding Deluxe Die Set for 6mm Dasher gives handloaders three dies in one box, which is a nice upgrade over a standard two-die set. You get a full-length sizing die, a bullet seating die, and a dedicated neck sizing die, so you can switch between full-length sizing and neck-only sizing depending on how your rifle and brass are behaving. For a cartridge like the Dasher, where consistency is everything, having both sizing options on hand is a real advantage.
The 6mm Dasher earned its reputation in 600 and 1,000 yard benchrest before becoming a favorite across PRS and NRL firing lines. It runs on a 6mm BR Improved case with a 40-degree shoulder, delivering low recoil, excellent barrel life, and the kind of single-digit ES and SD numbers that keep shots landing where you call them. Dies this precise are a big part of getting there, since straight, concentric cases and repeatable neck tension are what separate a good group from a great one.
Why the Neck Sizing Die Matters in This Dasher Set
The neck sizing die is the piece that makes this a Deluxe set rather than a basic kit. Neck sizing only works the brass less, which can extend case life and help you tune in neck tension when you are chasing accuracy. Keep in mind that brass sized this way is best kept to the rifle it was fired in, since neck-only cases may not chamber freely in another gun. When you need to bump shoulders back for reliable feeding, the full-length die is right there in the same box.
Getting the Most From Your Redding 6mm Dasher Dies
These are steel dies built for the small shellholder and small rifle primer brass that most Dasher shooters run. A shellholder is not included, so grab the correct one if you do not already have it. Everything stores in a protective Redding case with a spare decapping pin and an Allen wrench for the lock rings, so it all stays organized on the bench.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 84648
- UPC: 611760846489
- Caliber: 6mm Dasher
- Set Type: Deluxe 3-Die Set
- Dies Included: Full Length Sizing, Neck Sizing, Seating
- Bullet Diameter: 0.243 in
- Die Material: Steel
- Thread: 7/8-14
- Shellholder Size: #1 (not included)
- Shipping Weight: 1.6 lbs
What’s Included
- Full Length Sizing Die
- Neck Sizing Die
- Bullet Seating Die
- Plastic storage case
- Spare decapping pin
- Allen wrench for lock rings
Frequently Asked Questions
What dies come in the Redding Deluxe Die Set for 6mm Dasher?
This Deluxe set includes three dies: a full-length sizing die, a neck sizing die, and a bullet seating die. It is essentially Redding's full-length die set with the neck sizing die added for more control over neck tension. That extra die is what makes it a Deluxe set rather than a standard two-die kit.
Does this set include a shellholder?
No, a shellholder is not included with this set. The 6mm Dasher uses a #1 shellholder, so pick up the correct one if you do not already have it on the bench. Redding sells both standard and competition shellholders for this case.
When should I neck size versus full-length size with this set?
Neck sizing only works the brass less and can help with case life and fine-tuning neck tension, which many Dasher shooters like for accuracy. Just remember that neck-sized-only brass is best kept to the rifle it was fired in, since it may not chamber freely in another gun. Use the full-length die when you need to bump the shoulder back for reliable chambering and feeding.
Is the 6mm Dasher a good cartridge to reload for?
It is one of the best. The Dasher is a 6mm BR Improved design known for low recoil, strong barrel life, and the ability to produce very low ES and SD numbers, which is why it dominates benchrest and shows up all over PRS and NRL. It is also considered forgiving to tune, so a quality die set like this one helps you take full advantage of that accuracy potential.



Reviews
There are no reviews yet.