0
0

Redding Competition Shell Holder Set #6 – 5-Piece .002″ Headspace Kit

UPC: 611760116063

$62.99

29 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever chased an inconsistent shoulder bump by cranking your sizing die up and down, this is the fix. The Redding Competition Shell Holder Set #6 gives you five shell holders in graduated heights, each stepped in .002" increments, so you set your die once for a firm cam over and then control case-to-chamber headspace just by swapping holders. It takes the guesswork and the slop out of the equation and makes every die behave like a custom die.

How the Redding #6 Shell Holder Set Works

The set includes holders marked +.002", +.004", +.006", +.008", and +.010". The common method is to screw your full-length or body die down to make hard contact with the tallest +.010" holder for a clean cam over, then step down through the holders until you hit the exact bump your rifle wants. A lot of reloaders land on roughly .002" of bump for a bolt gun, and this set lets you dial that in and repeat it batch after batch. Each holder is clearly stamped with the amount it reduces headspace, so there's no measuring tools or feeler gauges needed once you've found your number.

What the #6 Size Fits

The #6 covers a popular lineup of magnum and modern cartridges, including 6.5 PRC, 7mm PRC, 300 PRC, 7mm Remington Magnum, 300 Winchester Magnum, 300 WSM, 338 Winchester Magnum, and 375 Ruger, plus anything else that runs a Redding #6 or RCBS #4 shell holder. If your case head slips into a standard #6, this set is the matching precision upgrade.

Built for Repeatable Results

Every holder wears a black oxide finish and is machined to tight tolerances, and the whole set tucks into a heavy-duty plastic storage box so your holders stay together and organized on the bench. It's a simple, well-made tool that solves a real problem for anyone who cares about accurate, long-lived brass and ammo that chambers the same way every single time.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 11606
  • UPC: 611760116063
  • Size: #6
  • Set Quantity: 5 shell holders
  • Increments: +.002", +.004", +.006", +.008", +.010"
  • Finish: Black Oxide
  • Cross Reference: Fits Redding #6 / RCBS #4 cartridges
  • Press Type: Single Stage / Press Type
  • Storage: Heavy-duty plastic box included
  • Country of Origin: United States
  • Shipping Weight: 0.2 lbs

What’s Included

  • 5 competition shell holders (+.002", +.004", +.006", +.008", +.010")
  • Heavy-duty plastic storage box

Frequently Asked Questions

What cartridges does the Redding Competition Shell Holder Set #6 fit?

The #6 size fits a wide range of magnum and modern cartridges, including 6.5 PRC, 7mm PRC, 300 PRC, 7mm Remington Magnum, 300 Winchester Magnum, 300 WSM, 338 Winchester Magnum, and 375 Ruger. It works with any cartridge that uses a standard Redding #6 shell holder or an RCBS #4. If your case head seats in a #6, this set is the matching upgrade.

How do I use these competition shell holders to set shoulder bump?

The usual approach is to screw your sizing die down until it makes firm contact with the tallest +.010" holder for a solid cam over. From there, you work down through the holders (+.008", +.006", and so on) and measure your resized brass until you reach the shoulder bump you want. Once you find the right holder, you just use it every time for repeatable results without touching the die.

Why can't I just adjust my die instead of buying this set?

You can adjust a die, but presses often have a little slop in the linkage that makes consistent bump hard to repeat. Setting the die for a firm cam over against the shell holder removes that play and locks in your sizing. These holders let you fine-tune headspace in precise .002" steps, which is tough to do reliably by eye with die adjustments alone.

Is a measuring tool required to use the Redding #6 set?

A headspace comparator or bump gauge is handy for finding your ideal shell holder the first time around. After that, each holder is clearly marked with how much it reduces headspace, so you can grab the right one and go without any extra tools. Many reloaders note the correct holder for each rifle right inside the storage box lid for quick reference.

Additional information

UPC

611760116063

Manufacturer

Manufacturer Part Number

11606

Shipping Weight

0.2

Style

Press Type

Reviews

There are no reviews yet.

Be the first to review “Redding Competition Shell Holder Set #6 – 5-Piece .002″ Headspace Kit”