Description
If you've been chasing tighter groups out of your 7mm Remington Magnum, the seating step is where a lot of consistency is won or lost. The Redding Competition Seating Die tackles that head on with a floating, straight-line design that's earned its reputation as one of the most trusted seaters in precision reloading. This is the 7mm Rem Mag model, part number 55136, built for the 0.284 bullet diameter.
What sets it apart is the sliding chamber sleeve. Before any bullet gets pushed down, the case and bullet are fully captured and aligned inside a close-fitting, precision ground sleeve. That means everything is held true before seating pressure is applied, which goes a long way toward knocking out the runout and concentricity issues that plague ordinary seaters. The seating stem itself is precision ground to match bullet diameter and fits so tightly in its guide that Redding likes to say it floats on a column of air.
Dialing In With the 55136 Micrometer Head
The micrometer adjustment is where this die really shines for load development. It's calibrated in .001" increments and adjusts smoothly without clicks, so you can fine tune seating depth to find your rifle's sweet spot. There's also a setting feature that lets you zero the micrometer to your preferred depth, making it easy to return to a proven load later without guesswork.
What the Redding Competition Seating Die Won't Do
Worth knowing up front: this is a seating die only and it does not crimp the bullet. For most precision 7mm Rem Mag handloads that's exactly what you want, since crimping isn't typically used on match ammo. If your application calls for a crimp, you'd add a separate crimp die. It uses the standard #6 shellholder for 7mm Rem Mag and threads into any standard 7/8"-14 press.
For handloaders who care about repeatable seating depth and straight ammo, this die is a serious upgrade over a standard seater and a favorite among those loading the 7mm Rem Mag for hunting and long range work.
Key Specifications
- Brand: Redding
- Caliber: 7mm Remington Magnum
- Die Type: Competition Bullet Seating Die
- Bullet Diameter: 0.284"
- Adjustment: Micrometer, .001" increments, infinitely adjustable (no clicks)
- Seating Stem: Precision ground to match bullet diameter (STD profile)
- Thread Size: 7/8"-14
- Shellholder: #6 standard
- Crimp: Does not crimp
- Manufacturer Part Number: 55136
- UPC: 611760551369
- Shipping Weight: 1.05 lbs
What’s Included
- One Redding Competition Seating Die with precision ground sliding chamber sleeve
- Micrometer adjustment head with precision ground bullet seating stem
- Plastic storage case
Frequently Asked Questions
Does the Redding Competition Seating Die for 7mm Rem Mag crimp the bullet?
No, this die seats only and does not apply a crimp. That's standard for competition and precision seating dies, since most match and precision loads don't use a crimp. If you need to crimp, you'd add a separate crimp die to your process.
What makes the Redding Competition Seater more accurate than a standard seating die?
It uses a sliding chamber sleeve that fully captures and aligns both the case and bullet before seating begins. Combined with a precision ground floating seating stem matched to bullet diameter, this keeps everything concentric and knocks down runout. It's a big step up over a standard seater for consistent, straight ammo.
How precise is the micrometer on this die?
The micrometer head is calibrated in .001" increments and is infinitely adjustable without clicks, so you can fine tune seating depth very precisely. It also has a setting feature that lets you zero it to your favorite depth, making it easy to return to a proven load.
What shellholder and press does the 55136 require?
The 7mm Rem Mag uses a standard #6 shellholder. The die has standard 7/8"-14 threads, so it fits any common single stage or turret reloading press.





Reviews
There are no reviews yet.