Description
The Redding Competition Seating Die for the 6mm Dasher is the one you reach for when seating depth consistency is the whole ballgame. This is a straight-line seater built around Redding's patented floating stem design, which has long been regarded as the standard for this style of die. The seating stem fits the bullet guide so precisely that it can be demonstrated to float on a column of air, and that tells you everything about the tolerances Redding holds here. For a benchrest round like the Dasher, where tiny changes in seating depth show up on paper, that kind of repeatability matters.
How the 6mm Dasher Competition Seater Works
The magic is in how the case and bullet are handled before any seating happens. A close-fitting, precision ground sliding sleeve captures and aligns the case and bullet, so nothing shifts or tips as the stem comes down. The seating stem itself is precision ground to match bullet diameter exactly rather than turned on a lathe, which is a big part of why these dies produce such low runout. The result is ammo that chambers consistently and groups the way a Dasher is capable of grouping.
Dialing In Your Dasher Seating Depth
Up top you get a micrometer adjustment head calibrated in .001 inch increments. It's infinitely adjustable with no clicks, so you can land on any depth you want, and a zero-set feature lets you record your favorite setting and return to it anytime. If you chase lands, swap bullets, or track your throat as it moves, this makes finding and repeating the ideal bullet jump quick and painless.
A couple of real-world notes worth knowing. This die seats bullets only and does not crimp, which is exactly what you want for precision work. It's also not intended for compressed loads. If you want a crimp, that's handled by a separate die. For 6mm Dasher reloaders running quality brass and match bullets, this seater pairs naturally with Redding's Type-S bushing sizing dies to round out a serious precision setup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55648
- UPC: 611760556487
- Caliber: 6mm Dasher
- Die Type: Competition Bullet Seating Die
- Number of Dies: 1
- Adjustment: Micrometer head, .001 inch increments, infinitely adjustable
- Seating Stem: Precision ground floating stem matched to bullet diameter
- Thread: 7/8 x 14 TPI
- Bullet Diameter: 0.243 inch
- Shellholder: Not included (Standard #1)
- Crimp: Does not crimp
- Shipping Weight: 0.89 lb
What’s Included
- One Redding Competition Seating Die with precision ground sliding sleeve
- Micrometer adjustment head with precision ground bullet seating stem
- Die storage box
Frequently Asked Questions
Does the Redding Competition Seating Die for 6mm Dasher crimp the bullet?
No, this die seats bullets only and does not apply a crimp. That's by design, since precision reloaders generally avoid crimping to protect case necks and keep runout low. If you want a crimp, you'll need a separate crimp die.
Is a shellholder included with the die?
No, the shellholder is not included with this seating die. The 6mm Dasher uses a standard #1 shellholder, so you'll want to have that on hand. Redding also offers a competition shellholder set if you want to fine-tune headspace with your sizing die.
What makes this Competition Seater more accurate than a standard seating die?
A close-fitting sliding sleeve fully captures and aligns the case and bullet before seating begins, so nothing tips or shifts during the stroke. The floating seating stem is precision ground to match bullet diameter, which keeps runout low and seating depth consistent. The micrometer head then lets you repeat that depth down to .001 inch.
Can I use this die with compressed loads in my 6mm Dasher?
No, Redding notes this seater is not intended for use with compressed loads. For typical Dasher match loads running quality brass and match bullets, that's rarely a concern. If you're working with a heavily compressed charge, a standard profile seater is the better tool.





Reviews
There are no reviews yet.