Description
If you're loading 6.5 PRC for accuracy and you want your finished rounds to come out straight every single time, the Redding Competition Seating Die is one of the best-regarded tools you can bolt into your press. It's a straight-line seater built around a design that's earned a reputation among precision handloaders for taming the runout issues that creep in with ordinary seating dies.
The heart of this die is the sliding sleeve and free-floating stem. As the case enters the die, a close-fitting, precision-ground sleeve completely captures and aligns both the case and bullet before seating ever begins. The seating stem itself is ground to match the 6.5mm (.264) bullet diameter, and the fit between the bullet guide and stem is tight enough that the stem essentially floats on a column of air. The result is a cartridge that drops out with minimal bullet runout, which is exactly what you want chasing small groups at distance.
Dialing In Your 6.5 PRC Seating Depth
Up top you get a micrometer adjustment calibrated in .001-inch increments. It's infinitely adjustable with no detents, so you can creep right onto the length you want, and the zero-set feature lets you lock in your rifle's favorite seating depth and return to it later without guesswork. Anyone who has chased a load's sweet spot by tweaking a lock-ring seater will appreciate how much faster and more repeatable this makes the process.
What the 6.5 PRC Competition Seating Die Won't Do
Worth knowing up front: this is a dedicated seater and it does not crimp. If you need a crimp, you'll want a separate taper or profile crimp die. It also ships with the standard-profile seating stem, which handles the most common 6.5mm bullets well. If you run long, high-BC VLD or secant-ogive bullets, Redding offers an optional VLD stem (part 55746) that gives better ogive contact. One more note from Redding: this die is not intended for compressed powder charges, since the thin-walled competition stem isn't built for that extra pressure.
Paired with a quality bushing or Type S sizing die, this seater rounds out a serious 6.5 PRC precision setup.
Key Specifications
- Manufacturer: Redding
- Cartridge: 6.5 PRC
- Die Type: Competition Bullet Seating Die (straight-line)
- Bullet Diameter: .264 / 6.5mm
- Adjustment: Micrometer, .001" increments, infinitely adjustable with zero-set
- Stem Included: Standard profile seating stem (55046)
- Optional VLD Stem: 55746 (sold separately)
- Thread: 7/8"-14
- Crimp Capability: No (seater only)
- Manufacturer Part Number: 55487
- UPC: 611760554872
- Shipping Weight: 0.94 lb
What’s Included
- One Redding Competition Seating Die for 6.5 PRC with precision-ground sliding chamber sleeve
- Micrometer adjustment head with standard-profile precision-ground seating stem
- Die storage box
Frequently Asked Questions
Does the Redding Competition Seating Die for 6.5 PRC crimp the bullet?
No, this is a seating die only and does not apply any crimp. If you want to crimp your 6.5 PRC loads, you'll need to add a separate taper crimp or profile crimp die. Most precision 6.5 PRC handloaders skip crimping entirely and rely on neck tension instead.
What makes this die more accurate than a standard seating die?
A precision-ground sliding sleeve captures and aligns both the case and bullet before seating begins, while a free-floating stem ground to bullet diameter keeps everything concentric. That combination minimizes bullet runout, which translates to straighter, more consistent ammo. The micrometer top also lets you set and return to a repeatable seating depth.
Will the Redding 6.5 PRC Competition Seating Die work with VLD or high-BC bullets?
It ships with the standard-profile stem, which handles the most common 6.5mm bullets just fine. Long, high-BC bullets with secant ogives can bottom out in the standard stem, so Redding offers an optional VLD stem (part 55746) that provides proper ogive contact. The VLD stem swaps right in and is a popular upgrade for folks loading bullets like Berger Hybrids or longer ELD projectiles.
Can I use this die with compressed powder charges?
Redding advises against it. The competition stem has relatively thin walls by design, and the extra pressure from compressed charges can damage it. For compressed loads, a standard seating die is the safer choice.




Reviews
There are no reviews yet.