0
0

Redding 300 Winchester Magnum Body Die (75153) | Reloading

UPC: 611760751530

$39.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you neck size your 300 Win Mag brass, you already know the drill. After a few firings the body starts to spring out just enough that chambering turns into a chore. That's exactly where the Redding 300 Winchester Magnum Body Die earns its keep. It full length resizes the case body and sets back the shoulder position for easy chambering, all while leaving the neck completely alone so your carefully set neck tension stays put.

Redding built these dies for benchrest competitors long before they were a catalog item, and the appeal is simple. The body die has no internal parts, no decapping rod, and no expander ball. That clean, uncomplicated design is a big part of why accuracy-minded handloaders reach for it. You run the case through with external lube only, and it squeezes the body back down to proper dimensions without the neck ever entering the picture.

How the 300 Win Mag Body Die Fits Your Bench

Most folks pair this die with a dedicated neck sizer like a Lee Collet die or a Redding Type S bushing neck die. The routine is easy: neck size for a few firings to get the benefits of minimal brass working, then run the case through the body die once chambering starts to tighten up. It brings the overworked brass right back into spec so the round drops in clean again.

Dialing In Shoulder Bump With the Redding Body Die

Just like a conventional sizing die, you control the amount of shoulder bump by adjusting the die's height relative to your shellholder. A datum or bump gauge makes this painless. Measure a fired case, then set the die to push the shoulder back right around .002 inches for a bolt gun. That small amount is usually all you need for smooth feeding without overworking the case or trimming brass life.

Machined in the USA from steel and held to Redding's tight tolerances, this is a precision tool that pays off for anyone chasing consistency out of their 300 Win Mag loads.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 75153
  • UPC: 611760751530
  • Caliber: .300 Winchester Magnum
  • Die Type: Body Die
  • Material: Steel
  • Thread Size: 7/8-14
  • Standard Shellholder: #6 (sold separately)
  • Internal Parts: None (no decapping rod or expander)
  • Country of Manufacture: United States
  • Shipping Weight: 0.4 lbs

What’s Included

  • One Redding 300 Winchester Magnum Body Die with lock ring
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the Redding 300 Win Mag Body Die size the neck?

No, and that's the whole point of it. The body die full length resizes the case body and sets the shoulder back without touching the neck at all. You keep your neck tension intact, which is why handloaders pair it with a separate neck sizing die.

When should I use a body die instead of a full length sizing die?

Body dies shine for people who neck size their brass but eventually find cases getting tight to chamber after repeated firings. Running the case through the body die squeezes the body back into spec and bumps the shoulder so it drops in easily again. If you already full length size every time, a standard FL or Type S die covers the same ground in one step.

Can I set the shoulder bump with this die?

Yes. You control shoulder bump the same way you would with any sizing die, by adjusting the die's height relative to the shellholder. Measure a fired case with a bump or datum gauge, then set the die to push the shoulder back around .002 inches for most bolt guns.

Does the Redding Body Die come with a shellholder?

No, the shellholder is sold separately. The 300 Winchester Magnum uses Redding's #6 standard shellholder. If you want to fine tune shoulder bump even further, Redding's competition shellholder set is a popular add-on.

Additional information

UPC

611760751530

Manufacturer

Manufacturer Part Number

75153

Shipping Weight

0.4

Reviews

There are no reviews yet.

Be the first to review “Redding 300 Winchester Magnum Body Die (75153) | Reloading”