0
0

Redding 73 Style Steel Neck Sizing Bushing .367 Diameter

UPC: 611760733673

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding 73 Style Steel Bushing in .367 diameter is the kind of small part that makes a big difference on the loading bench. Instead of sizing your case necks down more than needed and then opening them back up with an expander, a bushing lets you size the neck to one precise diameter in a single pass. That means less brass flow, longer case life, and the exact neck tension you're after for consistent bullet seating.

This one is machined from heat-treated steel with sizing diameters that are hand polished to a surface hardness of Rc 60-62, which keeps sizing effort low and the finish slick as your brass passes through. Like all of Redding's steel bushings, it shares the standard 1/2 inch outside diameter by 3/8 inch length footprint, so it drops right into any Redding bushing-style neck sizing die with no fuss. The .367 size falls at the upper end of Redding's steel range, which runs from .185 inch through .368 inch in .001 inch increments.

Picking the Right .367 Steel Bushing

Sizing a bushing is simple once you know the trick. Measure the outside neck diameter of a loaded, unfired cartridge with a good micrometer, then subtract about .001 inch for standard brass. That gives you the bushing that will hold your bullet snug without squeezing the neck more than it needs. If you're running moly-coated bullets or want a firmer grip, stepping down an extra .001 or .002 inch is a common move. Many handloaders keep a few bushings on hand a thousandth apart so they can fine-tune tension without pulling the die.

Why the 73 Style Steel Bushing Earns Its Spot

Steel bushings like this are the go-to for folks who want repeatable results without spending more than they have to. They wear well, they don't cost much to add a few sizes to your kit, and the polished bore keeps things smooth round after round. The bushing is clearly marked with its size, so there's no squinting or second-guessing when you reach into the box for the right one.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73367
  • UPC: 611760733673
  • Bushing Diameter: .367 inch
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Outside Diameter: 1/2 inch
  • Length: 3/8 inch
  • Finish: Hand-Polished Sizing Diameter
  • Style: 73 Style Neck Sizing Bushing
  • Compatibility: All Redding Bushing-Style Neck Sizing Dies

What’s Included

  • One Redding 73 Style Steel Neck Sizing Bushing in .367 diameter

Frequently Asked Questions

What dies does the Redding .367 steel bushing fit?

It fits all Redding bushing-style neck sizing dies, including the Type S line. The bushing uses Redding's standard 1/2 inch outside diameter by 3/8 inch length, so it interchanges freely across their bushing dies with no adapters needed.

How do I know if .367 is the right size for my cartridge?

Measure the outside neck diameter of a loaded, unfired round with a micrometer, then subtract roughly .001 inch for standard brass. If that number lands around .367, this is your bushing. For moly-coated bullets or a tighter hold, many handloaders step down an extra thousandth or two.

What's the difference between the steel and titanium nitride Redding bushings?

Both share the same external dimensions and interchange in the same dies, and both are hand polished to Rc 60-62 hardness. The titanium nitride version adds a surface coating that reduces sizing friction even further, while the steel bushing is the straightforward, budget-friendly choice that performs great for most handloading.

Is the bushing marked with its size?

Yes, each bushing is clearly stamped with its size so you can grab the right one at a glance. The last three digits of the part number also match the diameter, so 73367 corresponds to the .367 bushing.

Additional information

UPC

611760733673

Manufacturer

Manufacturer Part Number

73367

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .367 Diameter”