Description
If you're running a Redding bushing-style neck sizing or Type S die, this .365 steel bushing (part number 73365) is how you fine-tune the fit between your bullet and case neck. Instead of oversizing your brass and working it harder than it needs to be, you pick the exact diameter that gives you just enough grip. The result is longer brass life, more consistent bullet release, and tighter groups downrange.
This one is made from heat-treated steel, and the sizing diameter is hand-polished to a surface hardness of Rc 60-62. That polish does more than look nice, it cuts down on the effort it takes to push a neck through and keeps things running smooth over a long loading session. It carries the standard external footprint of 1/2 inch O.D. by 3/8 inch long, so it interchanges freely with any Redding bushing-style sizing die and plays nice with Wilson-style bushings too.
Picking the Right Redding .365 Bushing Size
Sizing bushings are all about precision, so measuring matters. Take a loaded round, measure the outside diameter of the loaded neck with a good micrometer, then subtract .001 to .002 inches to account for brass springback and the tension you want on the bullet. Whatever number you land on is the bushing you grab. This .365 handles that specific loaded-neck measurement, and Redding offers the full lineup in .001 inch steps so you can get it exactly where you want it.
Where This Steel Bushing Fits In
Redding's neck bushings come in two flavors, plain heat-treated steel and titanium nitride coated, and both share the same external dimensions. This is the steel version, a great everyday choice for benchrest reloaders, precision rifle folks, and anyone chasing consistent neck tension. Each bushing is clearly stamped with its size I.D. so there's no guessing when you're swapping between loads. Made in the USA and built to last through a lot of loading cycles.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73365
- UPC: 611760733659
- Bushing Diameter: .365 inch
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 inch O.D. x 3/8 inch Long
- Finish: Hand-Polished Sizing Diameter
- Compatibility: All Redding Bushing-Style Neck Sizing Dies
- Size Increments: .001 inch
- Country of Origin: United States
- Type: Neck Sizing Bushing
What’s Included
- One Redding .365 heat-treated steel neck sizing bushing (73365)
Frequently Asked Questions
What dies does the Redding .365 steel bushing fit?
It drops right into any Redding bushing-style neck sizing die, including the Type S series and Competition sizer dies. Thanks to its standard 1/2 inch O.D. by 3/8 inch long dimensions, it also interchanges with Wilson-style bushings. You can swap bushings in seconds to match different loads.
How do I know if .365 is the right bushing size for me?
Measure the outside diameter of the neck on a loaded round using a precision micrometer. Then subtract .001 to .002 inches from that number to account for brass springback and the neck tension you want on the bullet. If that math lands you at .365, this is your bushing. Keep in mind moly-coated bullets often call for a slightly smaller size.
Why choose the steel bushing over the titanium nitride version?
The steel bushing is the straightforward, proven everyday option and it covers the vast majority of reloading needs. Both versions are heat-treated and hand-polished to Rc 60-62, so the steel delivers the same precise neck tension. The titanium nitride coating mainly adds extra lubricity and surface hardness, which some reloaders prefer for heavy-volume sizing.
What does a neck sizing bushing actually do for my reloads?
It lets you set the exact amount of neck tension holding your bullet rather than overworking the brass with a conventional sizer. That means you can hold the bullet securely without excessive resizing, which extends case life and improves consistency shot to shot. For precision and benchrest loading, that control is a big part of chasing tighter groups.



Reviews
There are no reviews yet.