0
0

Redding 73 Style Steel Neck Sizing Bushing .363 – 73363

UPC: 611760733635

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the Redding .363 steel neck sizing bushing, part number 73363, the little piece that lets you take real control over how your brass holds a bullet. Instead of overworking your case necks the way a standard one-size die does, a bushing-style setup sizes only as much as you need. That means less brass stretch, longer case life, and the kind of consistency that shows up on paper when you're chasing tighter groups.

How the .363 Redding Bushing Fits Your Setup

Every Redding neck sizing bushing shares the same outside dimensions, 1/2 inch O.D. by 3/8 inch long, so this .363 drops into any Redding bushing-style neck sizing die as well as the Type S and Competition dies. The bushings are offered in .001 inch increments across a wide range, so you can fine-tune neck tension down to the thousandth. One nice detail on these bushing dies is the way the bushing floats and self-centers on the case neck, which helps keep runout low when it's set up right.

Why the Steel 73363 Holds Up

This one is made from heat-treated steel with the sizing diameter hand-polished to a surface hardness of Rc 60-62. That hardened, polished finish is what keeps sizing effort down and lets the bushing wear evenly over thousands of cycles. It's the plain steel version, which a lot of handloaders prefer paired with a quality case lube, and it carries the same true-to-size reputation Redding is known for.

Picking the Right Bushing Size

Getting your size right is simple. Seat a bullet in the exact brass you plan to load, measure the outside diameter of the loaded neck with a micrometer or good caliper, then subtract about .001 to .002 inch to account for brass spring-back. Whatever number you land on is the bushing you want. If your loaded neck measures around .364, this .363 is likely your match, giving you roughly a thousandth of neck tension to hold the bullet without squeezing the brass more than it needs.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73363
  • UPC: 611760733635
  • Bushing Diameter: .363 in
  • Bushing Style: 73 Style Steel
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62, hand-polished
  • Outside Dimensions: 1/2 in O.D. x 3/8 in long
  • Type: Neck Sizing Bushing
  • Compatibility: Redding bushing-style, Type S and Competition dies
  • Country of Origin: USA

What’s Included

  • One Redding .363 heat-treated steel neck sizing bushing (73363)

Frequently Asked Questions

What dies does the Redding .363 steel bushing fit?

It fits all Redding bushing-style neck sizing dies, along with the Type S and Competition die setups. Because every Redding bushing shares the same 1/2 inch O.D. by 3/8 inch dimensions, they freely interchange within that lineup. Many other brands of bushing dies use the same universal size as well, though it's worth confirming your specific die.

How do I know if the .363 is the right bushing size for me?

Seat a bullet in the brass you actually plan to load, then measure the outside diameter of the loaded case neck with a micrometer. Subtract about .001 to .002 inch from that number to allow for brass spring-back, and that's your bushing size. If your loaded neck measures right around .364 to .365, this .363 will give you a light, consistent amount of neck tension.

What's the difference between the steel bushing and the titanium nitride version?

Both styles are heat-treated steel with the same external dimensions and both interchange in the same dies. The titanium nitride bushing adds a coating that increases surface hardness and further reduces sizing friction. This 73363 is the plain steel version, which plenty of handloaders run with a good case lube and swear by for its value and consistency.

Does using a bushing really help case life?

It can make a real difference. A bushing only sizes the neck as much as you choose rather than overworking it like a standard one-size die, so your brass stretches less and lasts longer. That controlled sizing also tends to tighten up neck tension consistency, which is a big part of chasing better accuracy.

Additional information

UPC

611760733635

Manufacturer

Manufacturer Part Number

73363

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .363 – 73363”

Related Products