0
0

Redding 73 Style Steel Neck Sizing Bushing .332 (73332)

UPC: 611760733321

$20.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .332 diameter steel neck sizing bushing from Redding's 73 series, part number 73332. If you run a Redding bushing style die and want real control over neck tension, this is the little piece that makes it happen. The bushing is made from heat treated steel, and the sizing diameter is hand polished to a surface hardness of Rc 60-62, which keeps sizing effort low and the finish smooth pass after pass.

How the .332 Redding Bushing Fits Your Setup

These bushings share standard external dimensions of 1/2 inch O.D. by 3/8 inch long, so they freely interchange across all Redding bushing style neck sizing dies. That means you can keep a range of sizes on hand and swap them as needs change without buying a new die. Each bushing is clearly marked with its size I.D., so there's no guessing when you reach into the box.

Picking the Right Size 73 Style Bushing

Redding offers these in .001 inch increments across the full .185 to .368 range, covering calibers from .17 all the way up to .338. The usual way to land on the correct size is to measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inch to account for brass springback and proper bullet tension. That .332 figure refers to the inside sizing diameter of this specific bushing.

Why Reloaders Reach for Redding Neck Bushings

The appeal here is simple: by choosing the exact bushing that matches your brass and bullet combo, you give the case neck just the right squeeze to hold the bullet securely without overworking the brass. Less overworking means longer case life and more consistent neck tension, which is a big deal for anyone chasing tight groups at the bench or in the field. It's a small, precise component that earns its keep every loading session.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73332
  • UPC: 611760733321
  • Series: 73 Style Steel
  • Diameter: .332 in
  • Material: Heat Treated Steel
  • Surface Hardness: Rc 60-62, Hand Polished
  • External Dimensions: 1/2 in O.D. x 3/8 in Long
  • Size Range Available: .185 in thru .368 in (.001 in increments)
  • Caliber Coverage: .17 thru .338
  • Compatibility: All Redding Bushing Style Neck Sizing Dies
  • Quantity: 1 Bushing

What’s Included

  • One Redding 73 Style .332 steel neck sizing bushing

Frequently Asked Questions

What dies will this .332 Redding bushing work with?

It fits all Redding bushing style neck sizing dies thanks to its standard 1/2 inch O.D. by 3/8 inch long external dimensions. You can freely swap it in and out and keep several sizes on hand for different loads. The only thing that changes between bushings is the inside sizing diameter.

How do I know if .332 is the right bushing size for my load?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract roughly .001 to .002 inch to allow for brass springback and bullet tension. The result points you to the bushing diameter you need. The .332 marking on this bushing refers to its sizing diameter.

Is this a steel bushing or the titanium nitride version?

This is the 73 series heat treated steel bushing, part number 73332. The sizing diameter is hand polished to an Rc 60-62 surface hardness to reduce sizing effort. Redding also makes a titanium nitride coated version in the 76 series, but that is a separate item.

Why use a bushing instead of a standard sizing die?

A bushing lets you set exactly how much neck tension you want by matching the bushing to your brass and bullet combo. That means you size only what you need, which reduces overworking the brass and helps with case life and consistency. It's a favorite tool among reloaders chasing tighter groups.

Additional information

UPC

611760733321

Manufacturer

Manufacturer Part Number

73332

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .332 (73332)”