0
0

Redding 73 Style Steel Neck Sizing Bushing .325 Diameter

UPC: 611760733253

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .325 diameter bushing from Redding's 73 series of heat treated steel neck sizing bushings, the heart of any bushing style neck die setup. Instead of relying on a one size fits all die to squeeze your case necks down and then drag an expander ball back through, a bushing lets you size the neck to a precise diameter in a single pass. That translates to straighter necks, less brass working, and the kind of repeatable neck tension that makes groups tighten up.

Redding makes these from heat treated steel with the sizing diameters hand polished to a surface hardness of Rc 60-62. That hard, smooth bore cuts down on sizing effort and helps the bushing hold its dimension over a long service life. Every bushing shares the same external footprint, a half inch outside diameter by three eighths of an inch long, so it drops freely into any Redding bushing style neck sizing die and self centers as it works.

Picking the Right .325 Redding Bushing

The .325 marked on this bushing is the sizing diameter. The simplest way to land on the correct size is to measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inch to account for brass spring back and give the bullet proper grip. If you shoot moly coated bullets, you may want to go a touch smaller. Because bushings are offered in .001 inch steps, a lot of handloaders keep a few neighboring sizes on the bench to fine tune tension for different bullets, lots of brass, or whether they neck turn.

Where the .325 Steel Bushing Fits

This bushing covers case necks that size to .325, so it pairs with cartridges whose loaded neck diameter lands right around that mark. Keep in mind the shell holder and the die itself are sold separately. If you're already running a Redding Type S or any of their bushing dies, this just slides right in and gets you dialed.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73325
  • UPC: 611760733253
  • Sizing Diameter: .325 inch
  • Material: Heat treated steel
  • Surface Hardness: Rc 60-62, hand polished
  • Outside Diameter: 1/2 inch
  • Length: 3/8 inch
  • Style: 73 Series steel bushing
  • Compatibility: Redding bushing style neck sizing dies
  • Size Range Available: .185 inch to .368 inch in .001 inch increments
  • Made In: USA

What’s Included

  • One Redding 73 Style steel neck sizing bushing, .325 diameter

Frequently Asked Questions

What die does the .325 Redding steel bushing fit?

It fits any Redding bushing style neck sizing die, including the Type S line. All 73 series bushings share the same half inch outside diameter and three eighths inch length, so they drop in freely and self center. The die and shell holder are sold separately.

How do I know if .325 is the right bushing size for my loads?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inch for brass spring back and bullet grip. If that number lands near .325, this is your bushing. Many handloaders keep a couple of sizes on hand to fine tune neck tension.

What is the difference between the steel and titanium nitride Redding bushings?

Both are made from heat treated steel and hand polished to Rc 60-62. The titanium nitride versions add a surface coating that increases hardness further and reduces sizing friction. This .325 is the standard steel version, which works great for most reloaders.

Why use a bushing instead of a standard full length die?

A bushing sizes the neck to a precise diameter in one pass, which lets you control exactly how much neck tension you get. It also lets you skip or reduce reliance on the expander ball, which tends to produce straighter necks with less runout. The result is more consistent ammo and often tighter groups.

Additional information

UPC

611760733253

Manufacturer

Manufacturer Part Number

73325

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .325 Diameter”