Description
Neck tension is one of those little details that separates ho-hum groups from tight ones, and this is where it gets controlled. The Redding 73 Style Steel Bushing in .323 is a heat-treated steel ring that sizes your cartridge neck down to .323 inch, giving you just enough grip to hold the bullet securely without over-working the brass. The sizing surface is hand-polished to a hardness of Rc 60-62, which keeps sizing effort low and helps the bushing hold its dimension through a long life of reloading sessions.
How the .323 Redding Bushing Earns Its Keep
The real beauty of the bushing system is flexibility. Instead of a fixed-diameter sizing die, you swap bushings to change neck tension on the fly. Want a touch more grip for a magnum load or a little less for a neck-turned match case? Pull one bushing, drop in another. This .323 lands right in the heart of the range used by .338 caliber cartridges and plenty of wildcats, and it works great anytime your loaded neck measures around .324 to .325 inch.
Fitting the Redding 73 Style Steel Bushing
Every Redding neck bushing shares the same external footprint, 1/2 inch outside diameter by 3/8 inch long, so they interchange freely across Redding bushing-style neck sizing dies including the Type S and Competition dies. There's no gunsmithing or fuss involved. You back off the sizing button, set your bushing, and you're off. To pick the right size, measure the outside diameter of a loaded cartridge neck with a bullet seated, then subtract about .001 inch for standard neck tension. That math is why this .323 is a natural fit for necks that mic around .324.
Made in the USA, these bushings are the kind of simple, well-made tool that quietly does its job for years. If you're chasing consistency at the bench, controlling neck tension with the right bushing is one of the easiest upgrades you can make.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73323
- UPC: 611760733239
- Bushing Diameter: .323 inch
- Style: 73 Style Steel Neck Sizing Bushing
- Material: Heat-treated steel, hand-polished
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Compatibility: Redding bushing-style neck sizing dies (Type S, Competition)
- Country of Origin: USA
What’s Included
- One Redding 73 Style .323 steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .323 steel bushing fit?
It fits all Redding bushing-style neck sizing dies, including the Type S and Competition die bodies. Every Redding neck bushing uses the same 1/2 inch O.D. by 3/8 inch long dimensions, so they interchange freely. You just drop it into the die body with no gunsmithing required.
How do I know if .323 is the right bushing size for me?
Measure the outside diameter of a loaded cartridge neck with a bullet seated, using a good micrometer or caliper. Then subtract about .001 inch from that number to get your bushing size for standard neck tension. If your loaded neck measures around .324 inch, this .323 bushing is typically the one you want.
What's the advantage of a bushing over a standard neck sizing die?
A bushing setup lets you change neck tension by swapping bushings instead of buying a whole new die. That means you can tune bullet grip for different loads, brass, or neck-turned cases quickly. It's one of the simplest ways to chase better consistency at the bench.
What's the difference between the steel and titanium nitride Redding bushings?
Both share the same dimensions and interchange in the same dies. The steel version is heat-treated and hand-polished to Rc 60-62 hardness. The titanium nitride version adds a surface coating that further increases hardness and reduces sizing friction, though the steel bushing handles most reloading jobs just fine.




Reviews
There are no reviews yet.