0
0

Redding 73 Style Steel Neck Sizing Bushing .315 – 73315

UPC: 611760733154

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Redding bushing-style sizing die and you're chasing tighter, more consistent handloads, this is the piece that lets you fine-tune neck tension down to the thousandth. This is the .315 diameter steel neck sizing bushing, part number 73315, machined from heat-treated steel and hand-polished to a surface hardness of Rc 60-62 so it slides over case necks with less effort and less wear.

The whole idea behind a bushing setup is control. Instead of resizing the neck all the way down and then expanding it back up, you pick a bushing that sizes the neck to just the amount of grip you want on the bullet. That means less working of the brass, longer case life, and the kind of repeatable neck tension that shows up on target. The bushing self-centers on the case neck as it enters the die, which helps keep runout low and concentricity high.

How the .315 Steel Bushing Fits Your Setup

These bushings carry the same external dimensions, a 1/2 inch outside diameter and 3/8 inch length, so they freely interchange across all Redding bushing-style neck sizing dies and the Type S full-length sizing dies. The size is clearly marked right on the bushing, so once you've built up a set you can tell them apart at a glance. Redding offers them in .001 inch increments across the range, which is what makes real tuning possible.

Picking the Right Redding Bushing Size

To land on the correct bushing, measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001 to .002 inches to account for brass spring-back and the tension you want on the bullet. If you're loading moly-coated bullets, you may want to step down another thousandth or two. It's a simple formula that takes the guesswork out of ordering.

Made in the USA, this is a small part that makes a real difference for precision rifle and benchrest handloaders who care about every bit of consistency they can squeeze out of their brass.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73315
  • UPC: 611760733154
  • Diameter: .315 in
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Finish: Hand-Polished
  • Compatibility: Redding Bushing-Style Neck Sizing and Type S Dies
  • Firearm Type: Rifle
  • Country of Origin: USA
  • Quantity: 1 Bushing

What’s Included

  • One Redding .315 heat-treated steel neck sizing bushing (73315)

Frequently Asked Questions

What dies does the Redding .315 steel bushing fit?

This bushing freely interchanges in all Redding bushing-style neck sizing dies as well as the Redding Type S full-length sizing dies. It shares the standard 1/2 inch outside diameter and 3/8 inch length common to Redding's bushing range. If your die is set up to run interchangeable bushings, this one drops right in.

How do I know if .315 is the right bushing size for my loads?

Measure the outside neck diameter of a loaded round using a precision micrometer, then subtract .001 to .002 inches to account for brass spring-back and the neck tension you want. That result is your bushing size. If you're running moly-coated bullets, you may want to go another thousandth or two smaller.

What's the difference between the steel and titanium nitride Redding bushings?

Both share the same dimensions and interchange in the same dies, so they're functionally the same fit. The steel version is heat-treated and hand-polished to Rc 60-62. The titanium nitride bushings add a surface coating to further reduce sizing friction and stress on the brass, but the plain steel bushings work great with a bit of case lube.

Why use a bushing die instead of a standard neck sizer?

A bushing lets you size the neck to a precise diameter in one pass rather than oversizing and then expanding back up. That means you work the brass less, which extends case life and delivers more consistent neck tension from round to round. The bushing also self-centers on the case neck, which helps keep runout down.

Additional information

UPC

611760733154

Manufacturer

Manufacturer Part Number

73315

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .315 – 73315”