Description
If you run a Redding bushing-style neck sizing die and want to fine-tune your neck tension instead of settling for whatever a standard die gives you, this .304 steel bushing is the part that lets you do it. It's a precision-machined piece that controls exactly how far your case neck gets sized down, so you're seating bullets with the grip you want and nothing more.
What the .304 Redding Steel Bushing Does
The whole idea behind a bushing system is control. Rather than oversizing the neck and then pulling it back out over the expander, you pick a bushing that sizes the neck to just the right diameter in one pass. This bushing measures .304 inches, so you'd typically land here after measuring the outside neck diameter of a loaded round and subtracting a thousandth or two to account for brass spring-back and bullet tension. Less working of the brass means your cases last longer and stay more consistent round to round, which is a big part of why bushing dies are popular with precision and benchrest reloaders.
Build Quality on the 73 Style Steel Bushing
These are made from heat-treated steel with the sizing diameter hand polished to a surface hardness of Rc 60-62. That hard, smooth surface cuts down on sizing friction and holds its dimensions over a long working life. Each bushing is clearly marked with its size, so there's no guesswork when you've got a drawer full of them, and the last three digits of the part number match the bushing diameter.
Fit and Interchangeability
Redding steel neck bushings share the same external dimensions, measuring 1/2 inch O.D. by 3/8 inch long, and they freely interchange across all Redding bushing-style sizing dies. The full lineup covers .185 through .368 inch in .001 inch increments, so you can tune neck tension in tiny steps as you develop a load. Proudly made in the USA.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73304
- UPC: 611760733048
- Bushing Diameter: .304 in
- Style: 73 Style Heat-Treated Steel
- Material: Heat-Treated Steel, Hand Polished
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Available Range: .185 in thru .368 in in .001 in increments
- Compatibility: All Redding bushing-style sizing dies
- Country of Manufacture: United States
- Quantity: 1 bushing
What’s Included
- One Redding 73 Style .304 heat-treated steel neck sizing bushing
Frequently Asked Questions
How do I know if the .304 bushing is the right size for my loads?
Measure the outside neck diameter of a loaded cartridge using the exact brass and bullets you plan to shoot, then subtract about .001 to .002 inch to account for brass spring-back and bullet grip. If your loaded neck measures around .306, the .304 bushing gives you roughly a thousandth or two of neck tension. Measuring a few loaded rounds and averaging them is the smart way to settle on a size.
Will this Redding steel bushing fit my die?
It freely interchanges in all Redding bushing-style sizing dies, which share the same bushing pocket. Redding bushings also work in Whidden and Wilson bushing dies since they use the standard 1/2 inch O.D. by 3/8 inch long dimensions. It will not work in a conventional non-bushing sizing die.
What's the difference between the steel bushing and the titanium nitride version?
Both are heat-treated steel with the same external dimensions and both deliver the same sizing control. The titanium nitride bushing adds a coating that increases surface hardness further and reduces sizing friction, which some reloaders prefer when sizing without lube inside the neck. The steel version shown here is hand polished to Rc 60-62 and is the more common choice.
Does using a bushing really help my brass last longer?
Yes, that's one of the main reasons people switch to a bushing system. Because you size the neck down the right amount in a single step instead of overworking it and dragging it back over an expander, the brass gets worked less. Less working means slower work-hardening, fewer neck splits over time, and more consistent neck tension round to round.



Reviews
There are no reviews yet.