Description
This is the Redding 73 Style steel neck sizing bushing in a .297 diameter, the kind of small part that makes a big difference once you start chasing consistency on the loading bench. It's a heat-treated steel bushing built to Redding's tight tolerances, and the sizing surface is hand-polished to a surface hardness of Rc 60-62 so your brass slides through with less effort and less stress. The whole point of a bushing like this is control: instead of running a one-size-fits-all expander, you pick the exact amount of neck tension your load needs and leave the rest of the neck alone.
How the .297 Redding Bushing Fits In
These bushings share a common external size of 1/2 inch outside diameter by 3/8 inch long, so they drop into any Redding bushing-style die. That includes the Type S neck sizing dies, the Type S full length sizing dies, and the Competition neck sizing dies. One bushing works across all of them, which makes swapping between setups painless. Each bushing is clearly marked with its size, so there's no guessing when you grab one out of the box or storage tray.
Dialing In Your Redding 73 Style Bushing Size
Picking the right size is simple. Measure the outside neck diameter of a loaded round with a good micrometer or caliper, then subtract about .001 to .002 inch to account for brass spring-back and the grip you want on the bullet. Because Redding offers these in .001 inch increments across the full .185 to .368 range, you can fine-tune neck tension to match the exact neck wall thickness of whatever brass you're running.
If you're after straighter necks, better concentricity, and brass that lasts longer, running the correct bushing is one of the easiest upgrades on the bench. The bushing self-centers on the case neck during sizing, which helps keep everything true. Made in the USA, this one covers the .297 diameter and pairs with your existing Redding bushing dies and shellholders.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 73297
- UPC: 611760732973
- Bushing Diameter: .297 in
- Style: 73 Style (Heat-Treated Steel)
- Material: Heat-treated steel, hand-polished
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Compatibility: Redding Type S and Competition bushing-style dies
- Available Range: .185 in to .368 in (.001 in increments)
- Country of Origin: USA
- Quantity: 1 bushing
What’s Included
- One (1) Redding 73 Style steel neck sizing bushing, .297 diameter
Frequently Asked Questions
Which dies does the Redding 73 Style .297 bushing fit?
It fits all Redding bushing-style dies, including the Type S neck sizing dies, Type S full length sizing dies, and the Competition neck sizing dies. All of these bushings share the same 1/2 inch O.D. by 3/8 inch external size, so they interchange freely. The die and shellholder are sold separately.
How do I know if .297 is the right bushing size for my brass?
Measure the outside neck diameter of a loaded cartridge with a micrometer or caliper, then subtract about .001 to .002 inch to allow for brass spring-back and bullet grip. That final number is your bushing size. Since neck wall thickness varies by brass brand, it's worth checking with the exact brass you plan to load.
What's the difference between the steel 73 Style bushing and the Titanium Nitride version?
This is the heat-treated steel bushing, hand-polished to a surface hardness of Rc 60-62 for smooth sizing. The Titanium Nitride bushings offer the same fit and function but add a TiN coating for extra hardness and lower friction. Both drop into the same dies, so it comes down to preference.
Do I need the expander button when using the Redding bushing?
No, a bushing die controls neck diameter directly, so many handloaders remove the expander and decapping rod assembly when running bushings. Sizing just the outside of the neck this way helps with concentricity and reduces how much you work the brass. You can still partial-size the neck by adjusting the decapping rod position if your die uses one.




Reviews
There are no reviews yet.