Description
This is the .283" heat-treated steel neck sizing bushing from Redding, part number 73283. It's one piece in Redding's massive bushing lineup that lets handloaders set neck tension precisely instead of sizing the whole neck down and springing it back out with an expander. Measuring 1/2" on the outside and 3/8" long, it drops right into any Redding bushing-style sizing die and swaps out in seconds.
What the .283 Steel Bushing Does for Your Loads
Neck tension is one of those details that separates plinking ammo from rounds that print tight groups. By picking the right bushing diameter, you control exactly how much the neck grips the bullet, which keeps your brass working less and your velocities more consistent. To find your number, measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001" to .002" to account for brass springback. If that math lands you at .283", this is your bushing.
How the 73283 Bushing Is Built
Redding makes these from heat-treated steel and hand polishes each one to a surface hardness of Rc 60-62. That hard, slick finish cuts down on the effort it takes to push a case neck through and helps the bushing hold its dimension over thousands of rounds. Every bushing is marked with its size, so there's no guessing when you pull one out of your storage box. The steel version is the workhorse choice, and it's the same bushing that interchanges freely across Redding's bushing-style dies.
If you shoot a cartridge that puts your loaded neck diameter right around .285", this .283" bushing is a common starting point, though your exact pick depends on your brass thickness and the bullet you're running. Keeping a small range of bushings on the bench is the smart move, since brass and components shift things a thousandth or two. It's made in the USA and built to the standard that's earned Redding its reputation with precision reloaders.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73283
- UPC: 611760732836
- Bushing Diameter: .283 inch
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- Outside Diameter: 1/2 inch
- Length: 3/8 inch
- Finish: Hand Polished
- Compatibility: All Redding Bushing-Style Sizing Dies
- Country of Origin: USA
What’s Included
- One Redding .283" heat-treated steel neck sizing bushing (73283)
Frequently Asked Questions
Will this .283 bushing fit my Redding die?
Yes. Redding neck sizer bushings interchange freely across all Redding bushing-style sizing dies, so this .283" bushing drops right in. It uses the standard 1/2" O.D. and 3/8" length shared by Redding's bushing lineup.
How do I know if .283 is the right bushing size for me?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002" to allow for brass springback and bullet tension. If that lands you at .283", this is the bushing you want. Your exact size can shift based on brass thickness and the bullet you load, so it's worth having a couple of nearby sizes on hand.
What's the difference between the steel bushing and the titanium nitride version?
Both share the same dimensions and function. The steel bushing is heat treated and hand polished to a Rc 60-62 surface hardness, while the titanium nitride version adds a TiN coating for even more surface hardness and reduced sizing friction. The steel 73283 is the reliable, everyday choice that most reloaders start with.
Does the .283 bushing have its size marked on it?
Yes, every Redding bushing is stamped with its size identification. That makes it easy to grab the right one out of a storage box or bushing kit without measuring each time.




Reviews
There are no reviews yet.