Description
This is the Redding 73 Style Steel Neck Bushing in .281" diameter, a small part that does a big job when you're after consistent, repeatable accuracy. Instead of overworking your brass with a standard full-length sizer, a bushing lets you size the neck just enough to hold the bullet with the exact tension you're after. That means less brass stretch, longer case life, and more uniform seating from round to round.
The bushing is made from heat-treated steel with sizing diameters hand-polished to a surface hardness of Rc 60-62, which keeps sizing effort low and the finish smooth on your case necks. Each one carries the standard 73-style external dimensions of 1/2" O.D. by 3/8" long, so it interchanges freely in any Redding bushing-style neck sizing die. The diameter is marked right on the bushing, so grabbing the right one out of your kit is quick and painless.
Picking the Right Redding .281 Steel Bushing
Sizing the neck correctly comes down to measuring, not guessing. Take the outside neck diameter of a loaded round with a precision micrometer, then subtract about .001" to .002" to account for brass spring-back and the tension you want on the bullet. The .281" size covers common loaded neck dimensions in a handful of 6mm, 25, and 6.5mm applications, but your own measured brass is always the final word. If you shoot moly-coated bullets, you may want to step down a thousandth or two for a slightly tighter neck.
Why Reloaders Reach for the 73 Style Steel Bushing
The nice thing about the bushing system is flexibility. Pick up a few sizes around your measured neck diameter and you can fine-tune tension to find what your rifle likes best, all without buying new dies. This steel version is the workhorse choice, tough and consistent, and it's made in the USA to the same tolerances Redding is known for. Keep in mind the die and shellholder are sold separately.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73281
- UPC: 611760732812
- Bushing Diameter: .281"
- Style: 73 Style Neck Sizing Bushing
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62, hand-polished
- External Dimensions: 1/2" O.D. x 3/8" long
- Compatibility: Redding bushing-style neck sizing dies
- Country of Origin: Made in USA
What’s Included
- One Redding 73 Style .281" steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding 73 style steel bushing fit?
This .281" bushing uses the standard 73-style dimensions of 1/2" O.D. by 3/8" long, so it interchanges freely in Redding bushing-style neck sizing dies. The die and shellholder are not included and are sold separately. If your die accepts the standard Redding bushing, this one drops right in.
How do I know if .281" is the right bushing size for me?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract roughly .001" to .002" to allow for brass spring-back and the neck tension you want. If that math lands on .281", this is your bushing. Measuring your own brass is always more reliable than going off published specs alone.
What's the difference between the steel bushing and the titanium nitride version?
Both share the same external dimensions and hand-polished Rc 60-62 hardness. The titanium nitride version adds a surface coating to further increase hardness and reduce sizing friction, while this steel bushing is the tough, straightforward workhorse option that reloaders have trusted for years.
Will a bushing die help my brass last longer?
It can. Because a bushing only sizes the neck down enough to hold the bullet, you avoid the overworking that comes with standard sizing, which reduces brass stretch and work-hardening. Picking the right bushing for your measured necks is the key to getting that benefit.




Reviews
There are no reviews yet.