0
0

Redding 73 Style Steel Neck Sizing Bushing .280 – MPN 73280

UPC: 611760732805

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .280" steel neck sizing bushing from Redding, part number 73280, and it's the kind of small part that makes a big difference at the loading bench. Instead of oversizing your case necks and then springing them back open with an expander, a bushing lets you size the neck down to just the amount you want in a single pass. Pick the right diameter and you get consistent neck tension round after round, which is what feeds that steady velocity and tight groups handloaders chase.

How the .280 Redding Bushing Works

The sizing bore on this bushing is heat-treated and hand-polished to a surface hardness of Rc 60-62, which keeps friction down and makes sizing feel smooth. The general rule for picking a size is to measure the outside diameter of a loaded round at the neck, then subtract about .001" to figure your bushing. The .280" size works well for a range of cartridges depending on brass thickness, so it's a common pick for folks loading several calibers in the 6.5mm and 25-caliber families.

Fitment for the Redding 73 Style Steel Bushing

These bushings carry the standard Redding external dimensions of 1/2" O.D. by 3/8" long, so they interchange freely across all Redding bushing-style neck sizing dies, including the popular Type S and Competition dies. The size is clearly marked right on the bushing, so once you've built up a small set you can grab the one you need at a glance. Redding offers these in .001" increments across a wide range, giving you the flexibility to fine-tune tension to your exact brass and bullet combo.

If you're serious about load consistency and want control over neck tension without an expander ball pulling your cases off center, a quality steel bushing like this one belongs in your kit. It's a simple, well-made American part that does exactly what it's supposed to.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73280
  • UPC: 611760732805
  • Bushing Diameter: .280"
  • Style: 73 Style / Type S Compatible
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62, hand-polished
  • External Dimensions: 1/2" O.D. x 3/8" long
  • Fitment: All Redding bushing-style neck sizing dies
  • Size Marking: Diameter marked on bushing
  • Country of Origin: USA

What’s Included

  • One Redding .280" heat-treated steel neck sizing bushing (MPN 73280)

Frequently Asked Questions

What dies does the Redding .280 steel bushing fit?

It fits all Redding bushing-style neck sizing dies, including the Type S and Competition neck and full-length sizing dies. The bushing uses the standard 1/2" O.D. by 3/8" long body, so it drops right into those dies without any fuss. It swaps out quickly whenever you want to change neck tension.

How do I figure out the right bushing size for my brass?

Seat a bullet in a sized case and measure the outside diameter of the loaded neck with calipers. Then subtract about .001" from that number to land on your bushing size. Neck wall thickness varies between brass brands, so it's worth measuring your own loaded rounds rather than relying on a chart.

What's the difference between the steel bushing and the titanium nitride version?

Both share the same dimensions and interchange in the same dies, so performance-wise they're close. The titanium nitride bushings add a coating that further boosts surface hardness and cuts sizing friction, which some handloaders prefer for stickier brass. The heat-treated steel version here is the proven standard that gets the job done.

Why use a bushing instead of a standard neck sizing die with an expander?

A bushing sizes the neck to your chosen diameter in one pass, so you can skip pulling the case back open over an expander ball. That means more consistent neck tension and less chance of pulling the neck off center. For precision loads, that consistency often translates to tighter groups.

Additional information

UPC

611760732805

Manufacturer

Manufacturer Part Number

73280

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .280 – MPN 73280”