0
0

Redding 73 Style Steel Neck Sizing Bushing .267 (MPN 73267)

UPC: 611760732676

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Redding's .267 diameter heat-treated steel neck bushing, part number 73267, and it's one of those small parts that makes a real difference once you start chasing consistency on the loading bench. Rather than oversizing your case necks and working the brass harder than it needs to be, a bushing lets you size the neck down just enough to hold the bullet with the exact tension you're after. Measure the outside neck diameter of a loaded round, subtract a thousandth or two for brass springback and bullet grip, and you've got your bushing size.

What the .267 Redding Steel Bushing Brings to the Bench

The body is heat-treated steel with sizing diameters that are hand polished to a surface hardness of Rc 60-62. That hard, slick finish is what keeps sizing effort down and helps the brass glide through without galling or dragging. It's a simple component, but the attention to finish is why Redding bushings have the reputation they do among precision handloaders.

Fitment and Sizing with the 73 Style Bushing

These bushings share the standard external dimensions of 1/2 inch outside diameter by 3/8 inch long, so they interchange freely across all Redding bushing-style neck sizing dies. The lineup runs the full range from .185 through .368 in .001 inch increments, and the last three digits of the part number tell you the size. In this case 73267 means a .267 inch bushing, which lands in the neighborhood of 6mm, 6.5mm and similar necked cartridges depending on your brass and bullet combination.

If you shoot moly-coated bullets, you may find you want a slightly tighter neck, so going a thousandth or two smaller can be worth testing. Having a couple of bushing sizes on hand lets you fine-tune neck tension without ever touching your die setup, which is a big part of why reloaders who care about group size end up with a small collection of these. Made in the USA.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73267
  • UPC: 611760732676
  • Diameter: .267 inch
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Finish: Hand-Polished Sizing Diameter
  • Outside Dimensions: 1/2 inch OD x 3/8 inch long
  • Style: 73 Style Neck Sizing Bushing
  • Compatibility: All Redding Bushing-Style Neck Sizing Dies
  • Quantity: 1 Bushing
  • Country of Origin: USA

What’s Included

  • One Redding .267 heat-treated steel neck sizing bushing (MPN 73267)

Frequently Asked Questions

How do I know if the .267 Redding bushing is the right size for my cartridge?

Measure the outside neck diameter of a loaded round using a precision micrometer, then subtract about .001 to .002 inch to account for brass springback and bullet tension. If that number lands at .267, this is your bushing. Many handloaders keep a few sizes on hand so they can fine-tune neck tension without changing their die.

Will this Redding 73 style steel bushing fit my die?

Yes, as long as you're running a Redding bushing-style neck sizing die. These bushings share the standard 1/2 inch outside diameter by 3/8 inch length and interchange freely across Redding's bushing-type dies, so swapping sizes is quick and easy.

What's the difference between the steel bushing and the titanium nitride version?

Both are heat-treated and interchange in the same dies. The steel bushing is hand polished to a hardness of Rc 60-62 for smooth, low-effort sizing, while the titanium nitride version adds a surface coating to further increase hardness and cut sizing friction. For most handloaders the steel bushing does the job well.

Why use a bushing instead of a standard neck sizing die?

A bushing lets you control exactly how much you size the case neck, so you apply just the right amount of tension to hold the bullet without overworking the brass. That means less brass flow, longer case life and more consistent neck tension, which often translates to tighter groups at the target.

Additional information

UPC

611760732676

Manufacturer

Manufacturer Part Number

73267

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .267 (MPN 73267)”