0
0

Redding 73 Style Steel Neck Sizing Bushing .262 (73262)

UPC: 611760732621

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding .262 steel neck sizing bushing lets you take real control over neck tension, which is one of the biggest factors in how consistently your reloads shoot. Instead of oversizing the neck and then pulling the brass back open with an expander, a bushing sizes it down to the exact diameter you choose. That means less working of the brass, better case life, and more uniform bullet grip from round to round. This is the .262 diameter in the 73 series, Redding part number 73262, and it's a common size for 6.5mm and similar neck setups.

How the Redding .262 Bushing Is Built

This one is made from heat-treated steel, and the sizing diameter is hand-polished to a surface hardness of Rc 60-62. That polish and hardness are what keep sizing effort low and give you a clean, smooth feel on the press handle. Steel bushings are the standard go-to and work great for most brass. If you run a lot of moly-coated bullets, some reloaders step down a thousandth or two for a touch more grip.

Fit and Sizing for the .262 Steel Bushing

Every Redding bushing in this range shares the same external dimensions, 1/2 inch O.D. by 3/8 inch long, so they drop in and interchange freely across all Redding bushing-style neck sizing dies, including the Type S and Competition dies. To figure out the right size, measure the outside diameter of a loaded cartridge neck with a bullet seated, then subtract about .001 inch. That gives you the neck tension to hold the bullet firmly without overworking the brass.

The bushing is clearly marked with its size, so there's no guessing once it's in the die. A lot of handloaders keep a few diameters on hand so they can fine-tune tension as they chase that last bit of consistency on the target.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73262
  • UPC: 611760732621
  • Type: Neck Sizing Bushing
  • Style: 73 Series Steel
  • Sizing Diameter: .262 inch
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62, hand-polished
  • External Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Quantity: 1 bushing
  • Compatibility: Redding bushing-style neck sizing dies
  • Country of Origin: USA

What’s Included

  • One Redding .262 steel neck sizing bushing (73262)

Frequently Asked Questions

What dies does the Redding .262 steel bushing fit?

It fits all Redding bushing-style neck sizing dies, including the Type S and Competition die sets. Every bushing in this series shares the same 1/2 inch O.D. by 3/8 inch long dimensions, so they interchange freely. Just make sure your die is a bushing-style die and not a standard sizing die.

How do I know if the .262 is the right bushing size for my brass?

Measure the outside diameter of a loaded cartridge neck with a bullet seated, then subtract about .001 inch to get your bushing size. If that measurement lands at .263, the .262 bushing will give you roughly a thousandth of neck tension. Many reloaders keep a couple sizes on hand to fine-tune grip for their specific load.

What's the difference between the steel bushing and the titanium nitride version?

Both share the same dimensions and hand-polished Rc 60-62 surface. The titanium nitride bushings add a coating that further hardens the surface and reduces sizing friction. The steel version is the standard choice and works great for most brass, while the TiN coating is often preferred by folks running uncoated or dry necks.

Does using a bushing help my brass last longer?

Yes. A bushing sizes the neck down to just the diameter you need instead of overworking it with a standard expander ball setup. Less working of the brass means less thinning and work-hardening, which generally stretches out case life and keeps neck tension more consistent.

Additional information

UPC

611760732621

Manufacturer

Manufacturer Part Number

73262

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .262 (73262)”