Description
This is a single .253 diameter steel neck sizing bushing from Redding, part number 73253. If you're running a Type S or Competition bushing die, this little piece is what gives you control over neck tension without reaching for a different die every time your brass or bullet setup changes. It's machined from heat-treated steel and the sizing surface is hand-polished to a hardness of Rc 60-62, which keeps sizing effort low and helps your cases come out consistent pass after pass.
How the .253 Redding Bushing Fits Your Setup
Every Redding neck bushing shares the same external footprint, a 1/2 inch outside diameter and 3/8 inch long, so this one interchanges freely across all Redding bushing-style neck sizing dies. Because bushings are sold individually in .001 inch increments, you build out a set that matches the exact brass and bullet combos you load for. The .253 marking is stamped right on it so you're never guessing which one you grabbed out of the box.
Picking the Right Bushing Size
Getting the correct diameter is simple. Seat a bullet in the brass you plan to load, measure the outside diameter of that loaded neck with a caliper or micrometer, then subtract about .001 inch for standard neck tension. Shooters running moly-coated bullets or wanting a firmer grip sometimes go a thousandth or two tighter. The bushing self-centers on the case neck as it sizes, which is a big part of why these dies produce such low runout.
Why Reloaders Reach for Redding Steel Bushings
The steel version is the workhorse of the lineup and gets along well with a light case lube like a spray-on lanolin blend. It only sizes the outside of the neck, so there's no expander ball dragging back through and working your brass, which means less case stretch and more uniform tension. These bushings have earned a solid reputation among precision handloaders, and they'll also swap into Wilson, Whidden, and RCBS bushing dies if you run more than one brand on your bench.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73253
- UPC: 611760732539
- Bushing Diameter: .253 in
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62, hand-polished
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Size Increments: .001 in
- Style: 73 Style / Type S
- Compatibility: Redding Bushing-Style Neck Sizing and Type S / Competition Dies
- Quantity: 1 bushing
What’s Included
- One (1) Redding .253 heat-treated steel neck sizing bushing (PN 73253)
Frequently Asked Questions
Which dies does the Redding 73 Style .253 steel bushing fit?
It fits all Redding bushing-style neck sizing dies, including the Type S and Competition sizer dies. Thanks to the standard 1/2 inch O.D. by 3/8 inch dimensions, it also interchanges with Wilson, Whidden, and RCBS bushings. One bushing can move between multiple die setups if you load several cartridges.
How do I know if .253 is the right bushing diameter for me?
Seat a bullet in the brass you load, measure the outside diameter of the loaded neck with a caliper or micrometer, then subtract about .001 inch. If that measurement lands around .254 inch, this .253 bushing is your match. Going a thousandth tighter is common for moly-coated bullets or when you want extra neck tension.
Do I still need an expander ball when using this bushing?
No, a bushing sizes the outside of the neck directly, so the expander is not required and many reloaders remove it entirely. Skipping the expander reduces case working and helps keep neck tension uniform. If you turn your necks for uniformity, running without the expander is the usual approach.
What's the difference between the steel bushing and the titanium nitride version?
This is the plain heat-treated steel bushing, hand-polished to a Rc 60-62 surface to keep sizing effort low. The titanium nitride version adds a surface coating that further increases hardness and cuts sizing friction. Both size the same and interchange in the same dies, so it comes down to preference and how much lube you like to run.




Reviews
There are no reviews yet.