Description
This is the Redding .245" heat-treated steel neck sizing bushing, part number 73245. It's a single interchangeable bushing made to drop into Redding's Type S and Competition bushing-style dies, giving you precise control over how much you squeeze down a case neck. Instead of a one-size-fits-all approach, bushings let you match neck tension to your exact brass and bullet combination, which is where real consistency on target comes from.
What the .245 Redding Steel Bushing Does
Standard full-length and neck sizing dies work the neck more than they often need to, which can harden brass and throw off concentricity over time. A bushing sizes the outside of the neck to exactly where you want it in one clean pass. This .245" steel bushing carries the same external footprint as the rest of the Redding lineup, 1/2" outside diameter by 3/8" long, so it freely swaps with any other bushing in your Redding bushing-style die. The sizing surface is hand-polished and heat-treated to a hardness of Rc 60 to 62, which keeps sizing effort low and the dimension holding steady.
Picking the Right Redding Neck Bushing Size
Getting the number right is simple. Seat a bullet in a piece of the brass you plan to load, measure the outside diameter of the loaded neck with a good micrometer or caliper, then subtract about .001" to account for brass spring-back. That gives you your bushing size. If a loaded neck measures .246", this .245" bushing lands you right around .001" of neck tension, which is a solid starting point for most precision loads. Many handloaders also pull the expander from their Type S dies when running bushings, since the bushing is doing the sizing work on its own.
Built for Handloaders Chasing Accuracy
Made in the USA, this bushing is the kind of small upgrade that pays off at the bench and on paper. It's a favorite among benchrest and long-range reloaders who want repeatable neck tension instead of guesswork. Keep a few sizes on hand and you can fine-tune tension as your brass works and grows through firing cycles.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73245
- UPC: 611760732454
- Bushing Diameter: .245"
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2" O.D. x 3/8" long
- Fit: Redding Type S and Competition bushing-style dies
- Finish: Hand-polished sizing diameter
- Country of Origin: USA
What’s Included
- One Redding .245" heat-treated steel neck sizing bushing (73245)
Frequently Asked Questions
What dies does the Redding .245 steel bushing fit?
It fits all of Redding's bushing-style neck sizing dies, including the Type S and Competition series. Every Redding bushing shares the same 1/2" outside diameter by 3/8" long dimension, so they freely interchange within those dies. You can swap sizes in seconds without any extra tools.
How do I know if the .245 is the right bushing size for me?
Seat a bullet in the brass you plan to load and measure the outside diameter of the loaded neck with a micrometer or caliper. Subtract about .001" from that measurement to allow for brass spring-back, and that's your bushing size. If your loaded neck runs around .246", this .245" bushing gives you roughly .001" of neck tension.
What's the difference between the steel bushing and the titanium nitride version?
Both are heat-treated steel with hand-polished sizing surfaces and a hardness of Rc 60 to 62. The titanium nitride version adds a surface coating that boosts hardness further and reduces sizing friction, which some reloaders like when running cases dry or lightly lubed. This .245 is the plain steel version, which plenty of handloaders prefer with a good case lube.
Do I still need the expander when using this bushing?
In most cases the bushing does the neck sizing on its own, so many reloaders remove the decapping rod and expander from their Type S dies when running bushings. Sizing the outside of the neck directly tends to improve concentricity and avoids overworking the brass. It's worth experimenting with your own setup to see what gives you the straightest, most consistent necks.




Reviews
There are no reviews yet.