0
0

Redding 6mm GT Type-S 3-Die Neck Sizing Set (78199)

UPC: 611760781995

$183.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6mm GT has earned its spot as one of the go-to cartridges in PRS and NRL competition, and if you're running one, you already know that match-grade ammo comes down to consistent brass prep. This Redding Type-S 3-Die Neck Sizing Set is built for reloaders who want to manage neck tension precisely rather than leave it to chance. The heart of the set is the bushing-style neck sizing die, which uses interchangeable bushings so you can size the neck to the exact diameter your load development calls for.

What Makes the Redding Type-S Neck Sizing System Different

The Type-S bushing die accepts interchangeable bushings available in .001-inch increments, letting you tune neck tension to match your brass and bullet combination. Because the bushing self-centers on the case neck, you get improved concentricity on every pass. The adjustable decapping rod means you can position the bushing to size only part of the neck length if you prefer partial neck sizing. The die comes with a standard size button for folks running commercial brass as-is, plus a decapping pin retainer so those who turn or sort necks can size without the button at all.

Three Dies That Cover Your 6mm GT Brass Prep

Along with the neck sizing die, you get a body die and a Redding Series 92xxx seating die. The body die lets you resize the case body and bump the shoulder back when your brass needs it, which is handy after a few firings when things start to tighten up in the chamber. The seating die handles accurate bullet placement and can be set up to apply a crimp if your load ever calls for it. Together the three cover the brass prep cycle for a cartridge that thrives on consistency.

Picking Bushings for Your 6mm GT

Keep in mind the set ships without bushings, so you'll want to grab the right size separately. The simplest method is to measure the neck diameter of a few loaded rounds with a good micrometer, then subtract .001 to .002 inches to land on a starting bushing that creates proper press fit on the bullet. Running Alpha or Lapua 6mm GT brass, a .266-inch bushing is a common starting point for development.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 78199
  • UPC: 611760781995
  • Caliber: 6mm GT
  • Die Type: Type-S Bushing Neck Sizing
  • Set Configuration: 3-Die Set
  • Sizing Style: Neck sizing with interchangeable bushings
  • Bushing Increments: .001 inch
  • Seating Die: Redding Series 92xxx standard seating die
  • Bushings Included: No, sold separately
  • Shipping Weight: 1.558 lbs

What’s Included

  • Type-S bushing-style neck sizing die body
  • Body die
  • Redding Series 92xxx seating die
  • Standard size button
  • Decapping pin retainer

Frequently Asked Questions

Does the Redding 6mm GT Type-S die set come with bushings?

No, the set ships without bushings, so you'll need to purchase the correct size separately. Bushings are available in .001-inch increments so you can fine-tune neck tension. A .266-inch bushing is a common starting point if you're loading Alpha or Lapua 6mm GT brass.

What three dies come in this set?

You get a Type-S bushing neck sizing die, a body die, and a Redding Series 92xxx seating die. The neck die controls neck tension with interchangeable bushings, the body die resizes the case body and bumps the shoulder when needed, and the seating die handles bullet placement. Together they cover the full brass prep cycle for the 6mm GT.

How do I figure out which bushing size I need?

Measure the neck diameter of several loaded or dummy rounds with an accurate micrometer, then subtract .001 to .002 inches from the average. That number is a solid starting bushing to create proper press fit on the bullet. You can also measure neck wall thickness, double it, and add the bullet diameter to calculate loaded neck diameter.

Why would I neck size instead of full-length size for 6mm GT?

Neck sizing with a bushing lets you precisely control neck tension and preserve the fired case dimensions to your chamber, which many precision shooters find produces more consistent accuracy. The included body die gives you the option to resize the body and bump the shoulder when brass starts getting tight. This setup is popular with PRS and NRL competitors who prioritize consistency across high round counts.

Additional information

UPC

611760781995

Manufacturer

Manufacturer Part Number

78199

Shipping Weight

1.558

Reviews

There are no reviews yet.

Be the first to review “Redding 6mm GT Type-S 3-Die Neck Sizing Set (78199)”