Description
The 6mm GT has earned its spot as one of the go-to cartridges in PRS and NRL competition, and if you're loading for it, a quality die set makes all the difference. This Redding Full Length Die Set (part number 80199) is a two-die setup made specifically for the 6mm GT, giving you the tools to prep your brass and build consistent, match-ready ammo at the bench. Redding has been turning out precision reloading gear since 1946, and that reputation for tight tolerances carries right through to this set.
What the Redding 6mm GT Full Length Die Set Does
The full length sizing die works the entire case body and bumps the shoulder back, which resets your headspace so loaded rounds chamber smoothly in your rifle. It comes with a decapping rod assembly that includes a neck expander (size button) and a decapping pin, so you knock out spent primers and bring the neck back to spec in one pass. For a cartridge that was designed around clean mag feeding, keeping your shoulder bump dialed in is one of the easiest ways to stay consistent stage after stage.
Bullet Seating With the 6mm GT Die Set
The standard seating die includes a bullet guide and the proper seating plug for the 6mm GT, which keeps bullets started straight and seated to a repeatable depth. You adjust seating depth by threading the plug in or out, and there's a built-in crimp ring if you ever want to add a light crimp. Both dies use the common 7/8-14 thread, so they'll thread right into any standard single stage or turret press.
A Few Things to Know Before Loading 6mm GT
This set uses a #1 shell holder, which is sold separately if you don't already have one on the bench. The 6mm GT runs a .243 bullet diameter, so pair this with your match bullets and brass from makers like Alpha Munitions or Hornady and you're set. It's a straightforward, dependable set that rewards careful load work with the kind of accuracy this cartridge is known for.
Key Specifications
- Manufacturer: Redding
- Caliber: 6mm GT
- Die Set Type: Full Length 2-Die Set
- Bullet Diameter: .243
- Thread: 7/8-14
- Shell Holder: #1 (sold separately)
- Manufacturer Part Number: 80199
- UPC: 611760801990
- Shipping Weight: 1.27 lbs
What’s Included
- Full length resizing die with decapping rod assembly, size button and decapping pin
- Standard bullet seating die with seating plug
- Die box
Frequently Asked Questions
Does the Redding 6mm GT Full Length Die Set come with a shell holder?
No, the shell holder is not included and is sold separately. The 6mm GT uses a #1 shell holder, so grab one if you don't already have it on your bench. Once you have it, you're ready to start sizing brass.
What's the difference between this full length set and a neck sizing set?
The full length die works the entire case body and bumps the shoulder back to reset headspace, which helps rounds chamber easily and keeps feeding reliable. A neck sizing die only works the neck and leaves the body alone. For a cartridge like the 6mm GT that's often run through a magazine in competition, full length sizing is the popular choice for consistency.
Will these dies fit a standard reloading press?
Yes. Both dies use the common 7/8-14 thread, so they thread right into any standard single stage, turret, or progressive press. No special adapters needed.
What brass and bullets work with the 6mm GT die set?
The 6mm GT runs a .243 bullet diameter and pairs well with the low-drag match bullets this cartridge was designed around. Alpha Munitions and Hornady both produce 6mm GT brass, and these dies will size and seat either one. It's a favorite in PRS and NRL circles for its low recoil and easy load development.


Reviews
There are no reviews yet.