Description
If you're loading 6.5 PRC and chasing tighter groups, the Redding Type S bushing neck die gives you control over case neck size and bullet tension that standard dies just can't match. Instead of sizing the neck down more than necessary, you drop in a bushing sized specifically for your brass and the amount of grip you want on the bullet. Less working of the brass means less stress distortion, longer case life, and the kind of consistency that shows up on paper at distance.
How the Redding Type S Die Controls Neck Tension
The whole system runs on interchangeable bushings available in .001" increments, so you can measure the neck wall thickness of your loaded rounds and pick exactly the right bushing for the tension you're after. A common starting point is around .001" of tension for single-feeding a bolt gun, and closer to .002" if you're feeding from the magazine. The bushings aren't included, which lets you buy only what matches your brass rather than paying for sizes you'll never touch.
Why the 6.5 PRC Bushing Neck Die Runs So Straight
Concentricity is where this die earns its reputation. The bushing is designed to float with roughly .003" to .004" of clearance so it self-centers on the case neck as it sizes, which keeps bullet runout low and your rounds tracking straight. The adjustable decapping rod lets you position the bushing to size only part of the neck length if you want to leave a portion unsized for better alignment.
Living With the Type S Neck Die
It comes with a standard size button on the decapping rod, which is handy when you're running factory brass as-is. A decapping pin retainer is also included, so if you turn or sort your necks for uniformity you can pull the button entirely and let the bushing do all the sizing. The die uses standard 7/8"-14 threads and drops into any common single-stage, turret, or progressive press. Machined on precision lathes and heat-treated, this is built to hold tight tolerances load after load.
Key Specifications
- Manufacturer: Redding
- Caliber: 6.5 PRC
- Die Type: Type S Bushing Neck Sizing Die
- Bushing Increments: .001 inch (sold separately)
- Thread Size: 7/8"-14
- Material: Heat-treated steel
- Decapping Rod: Adjustable, with standard size button
- Manufacturer Part Number: 71487
- UPC: 611760714870
- Country of Origin: United States
- Shipping Weight: 0.775 lbs
What’s Included
- Type S bushing neck sizing die
- Adjustable decapping rod with standard size button
- Decapping pin retainer
- 7/8"-14 lock ring
- Storage box
Frequently Asked Questions
Does the Redding Type S die come with bushings for 6.5 PRC?
No, the bushings are sold separately. This lets you pick the exact bushing size that matches your brass and the neck tension you want. Measure the outside neck diameter of a loaded round, then choose a bushing that sizes it down to your target tension.
What bushing size do I need for my 6.5 PRC brass?
It depends on your brass and the tension you're after, since neck wall thickness varies between manufacturers. A good method is to measure the outside diameter of a loaded, seated round and subtract your desired tension, usually around .001" to .002". Many loaders keep a couple of bushings on hand to test what shoots best.
Will this die work in my press?
Yes. The Redding Type S neck die uses standard 7/8"-14 threads and drops into any common single-stage, turret, or progressive reloading press. You'll just need the correct shell holder for 6.5 PRC, which is not included.
Can I use this die without the sizing button?
You can. A decapping pin retainer is included, which lets you remove the standard size button while keeping the decapping pin in place. That setup is popular with folks who turn or sort their case necks for uniformity and want the bushing to do all the sizing.




Reviews
There are no reviews yet.