Description
The Redding Type S Full-Length Bushing Die for 6.5 PRC is built for handloaders who want more than a basic resize. It sizes the case body and bumps the shoulder while giving you exact control over the neck, all in a single operation. Swap in different bushings, which drop in and self-center on the neck, and you can dial neck tension to the thousandth to match your brass and your rifle's chamber.
Why the Type S 6.5 PRC Die Earns Its Spot on the Bench
Standard sizing dies squeeze the neck way down and then drag it back open over an expander ball, which can work the brass harder than it needs to and throw off concentricity. This die skips that fight. You pick a bushing in .001 inch increments to size the neck exactly where you want it, so the brass stays truer and your necks run more consistent runout. Less overworking means longer case life too, which anyone feeding a 6.5 PRC already appreciates.
Dialing In Neck Tension with the Full-Length Bushing Die
The adjustable decapping rod lets you reposition the bushing so you can partially size the neck rather than the full length if that's how you like your brass set up. Each die ships with a standard size button plus a decapping pin retainer, so if you turn your necks or run already-uniform brass, you can pull the button and let the bushing do all the work. There's real flexibility here depending on how deep you go into the precision side of things.
One more handy detail: strip out the bushing and the internal parts and this die doubles as a body die for a quick shoulder bump without touching the neck. For a cartridge like the 6.5 PRC that rewards attention to detail, it's a solid foundation for match-grade or just plain accurate handloads. Keep in mind bushings and a shell holder are not included, so you'll want to grab the right bushing for your neck measurement and a #6 shell holder to round things out.
Key Specifications
- Manufacturer: Redding
- Caliber: 6.5 PRC
- Die Type: Type S Full-Length Bushing Sizing Die
- Bushing Increments: .001 inch
- Bushing Size Range: 0.287 to 0.295
- Material: Heat-Treated / Case Hardened Steel
- Thread: 7/8-14
- Shell Holder: #6 (sold separately)
- Decapping Rod: Adjustable, included
- Manufacturer Part Number: 77487
- UPC: 611760774874
- Shipping Weight: 0.78 lbs
What’s Included
- One Redding Type S Full-Length Bushing Sizing Die
- Decapping rod assembly
- Standard size button
- Decapping pin retainer (for use in place of the size button)
- Plastic storage box
Frequently Asked Questions
Do bushings come with the Redding Type S 6.5 PRC die?
No, bushings are sold separately. The die uses the same interchangeable bushings as Redding's bushing-style neck sizing dies, available in .001 inch increments. You'll want to measure a loaded round's neck diameter and pick a bushing that gives you the neck tension you're after, usually a couple thousandths under that measurement.
What shell holder do I need for this 6.5 PRC die?
The 6.5 PRC uses a #6 shell holder, which is not included with the die. If you're already set up for 6.5 PRC or another cartridge sharing that case head, you may already have one. Otherwise it's a cheap add-on to pick up alongside the die.
Can this Type S die be used as a body die?
Yes. By removing the bushing and all the internal parts, the Type S Full-Length Bushing Die works as a body die, sizing the body and bumping the shoulder without touching the neck. That makes it a versatile piece if you want to separate your neck and body sizing steps.
How is this different from a standard full-length 6.5 PRC sizing die?
A standard die sizes the neck small and reopens it over an expander ball, which works the brass harder and can hurt concentricity. The Type S uses a bushing that self-centers and sizes the neck exactly to your chosen diameter, so you get precise neck tension control and truer brass. It's the go-to choice for precision and match handloaders.




Reviews
There are no reviews yet.