$40.95
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A complete recoil system upgrade beats bolting on individual parts. The Wilson Combat Shok-Buff for Commander brings everything together in one easy install—six recoil-absorbing buffers, two spring options for load tuning, an extra-power firing pin spring, and a precision-machined stainless steel guide rod that controls spring movement from start to finish.
Those poly fiber buffers aren't just padding. They slip onto the guide rod and sit between the spring head and the slide, stopping the slide from slamming into the frame with each shot. That single detail saves your frame from stress cracks, cuts felt recoil, and extends the life of springs themselves. Run enough rounds through a Commander without proper shock absorption and you'll feel the difference when the gun gets loose and inconsistent. The buffers soak up the punishment—literally absorbing the energy that would otherwise pound your pistol.
The kit ships with both a 20 lb extra-power spring and a 12 lb reduced-power spring, giving you options from the box. This matters more than most people realize. A full-length guide rod keeps whichever spring you choose perfectly straight during compression, meaning the barrel locks consistently in the same position every shot. Consistent barrel lockup equals groups that shrink noticeably on target. Pair that with an extra-power firing pin spring that you get in the kit, and light strikes become a non-issue even with harder primers or defensive loads.
If you can field strip your Commander, you can drop this system in without a gunsmith. Everything's included and matched—the guide rod, spring, plug, buffers, and firing pin spring all work together from the moment they're installed. The engineering is what makes it work, not complicated assembly. Once it's in, the gun cycles smoother, ejects more consistently, and handles the way it should.
This kit is designed specifically for Commander-length 1911s with a 4.25 inch barrel. Most steel-frame Combat Commanders work fine. Some specialty builds with short recoil tunnels or full-length rails (like certain STI models) may have compatibility issues, so double-check your barrel length and recoil tunnel dimensions before ordering.
Start with the 20 lb spring if you run standard full-power loads. Use the 12 lb spring for lighter target loads or 9mm conversion. The extra-power spring manages recoil better with factory ammunition, while the reduced-power option works if you're shooting softer loads or running lighter bullets. You can always swap springs once the guide rod is installed.
No gunsmith needed. If you can field strip your Commander and understand basic 1911 disassembly, you can install this. It's a drop-in system—remove the factory recoil spring and guide rod, install the new one, reassemble. A barrel bushing wrench makes the job smoother but isn't required.
The poly fiber buffers absorb punishment and typically last around 1,000 rounds before they swell or show wear. At that point, swap them out for fresh ones to keep protecting your frame. Wilson Combat sells the buffers separately if you need to refresh them.
| UPC | 874218002695 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 64C |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.