Reptilia RECC-E Front End QD Stock Accessory FDE – Sling Mount

Description

Reptilia designed this Front End QD accessory after a military end user group asked for a forward sling attachment point sitting right at the rear of the receiver. It bolts onto the front of your RECC-E Carbine Stock during installation and gives you a clean, purpose-built spot to run a two-point sling from up front. If you have been making do with a sling mount that sits too far back or fights your cheek weld, this puts the QD cup exactly where it belongs.

What the RECC-E Front End QD Adds to Your Setup

The biggest draw here is the reversible QD cup. You can mount it on the left or right side depending on how you carry and shoulder your rifle, which makes transitioning from strong side to support side a smooth, natural motion while you are slung up. That flexibility matters more than people expect, especially if you swap shooting positions often or share a rifle across a team. Because it attaches at the front of the stock rather than hanging off the buffer tube, it keeps your sling geometry tight and your cheek weld undisturbed.

Materials and Build on the Front End QD

Reptilia didn't cut corners on this small piece. It uses impact modified glass-filled nylon polymer, 7075 Type III anodized aluminum, and nitrided alloy steel hardware, which is the same quality mix you find on the RECC-E stock itself. At roughly 1.2 ounces, it disappears into your build without throwing off balance or adding noticeable weight. It is made in the USA.

This is a carbine-length front end meant to pair with the AR15/M16/SR-15 pattern RECC-E stock. If you are already running that stock and want a dedicated forward QD point, this is the factory-matched way to get it. Reptilia also offers a low-profile sling loop cup that drops into this front end if you prefer an anti-snag loop over a standard QD swivel down the road.