$99.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
There's a reason a good hammer and punch set sits near the top of every gunsmith's bench list. This kit from Real Avid pairs the Armorer's Master Hammer with the Accu-Punch 11-piece standard pin punch set, giving you the two tools you reach for most when installing or driving out pins on handguns and rifles. It's built for folks who want dedicated firearm tools instead of a repurposed hardware-store set.
The hammer runs 22 ounces with a full-length tang and a 9.5-inch handle, which gives it the heft to knock out a stubborn takedown pin without being so heavy you can't tap lightly on delicate parts. That balance is where it earns its keep. The head accepts interchangeable faces so you can match the material to the job, switching between soft-blow, steel, brass, nylon, and rubber depending on whether you're persuading a stuck pin or protecting a finish. Tucked into the handle is a magnetic pin starter that holds small pins in place for hands-free alignment, which saves you the usual dance of trying to keep fingers out of the strike zone.
The 11 punches are hardened steel with nickel plating to fight corrosion, and they cover a size range from 1/16 inch up to 9/32 inch. That spread handles the vast majority of pins you'll run into on AR builds, pistols, and general maintenance. You get two 1/16-inch punches since that small size tends to take the most abuse, plus 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, and 9/32. Each one has a hex-shaped handle wrapped with rubber O-rings, so they grip well and won't roll off the bench mid-job.
Sizes are stamped in large, easy-to-read markings so you're not squinting to find the right punch, and the whole set stores in a stand-up case with labeled slots. The case top folds all the way behind so it kickstands upright on your bench, keeping every punch and the hammer within arm's reach while you work. It's a tidy setup whether it lives on a shop bench or rides along in a range bag.
The set includes 11 hardened steel punches spanning 1/16 inch up to 9/32 inch. You get two 1/16-inch punches plus 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, and 9/32. That range covers the pins you'll typically run into on handguns, AR builds, and routine maintenance.
The hammer accepts different faces so you can match the material to the task. Steel and brass give you more driving force for stuck pins, while nylon, rubber, and the soft-blow head let you work around finished surfaces and delicate components. Swapping heads means one hammer covers everything from heavy persuasion to gentle taps.
The pin starter stores right in the hammer handle and uses a magnet to hold small pins in place for hands-free alignment. It keeps your fingers clear of the strike zone and takes a lot of the fumbling out of getting a small pin seated. It's a handy touch when you're starting the little pins that are easy to lose or drop.
Yes, it's well suited to both. The 22-ounce hammer has enough weight to drive out stubborn takedown pins yet stays controllable for lighter tapping, and the punch range handles most rifle and handgun pins. Reviewers building AR-15s and working on pistols have found it covers their everyday needs.
| UPC | 813119015212 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AVAMHAPS |
| Color | Black/Gray |
| Length | 20.9500 |
| Model | |
| Product Type | Punch Set |
| Shipping Weight | 2.86 |
You must be logged in to post a review.
Reviews
There are no reviews yet.