Description
When your action starts feeling gritty and your trigger group looks like it hasn't seen daylight in a while, this is the can you reach for. The Real Avid Foul-Out Gunk Blaster is a 12 oz aerosol cleaner and degreaser built to strip burnt powder, oil, and caked-on grease straight out of your gun's moving parts. It hits hard, flushes the junk out, and evaporates fast so you're not stuck waiting around or wiping up a greasy mess afterward.
What sets this apart from a standard spray can is the nozzle. Real Avid built in a two-position flip-up straw that gives you a wide spray for general cleaning and a tight, high-pressure stream for pinpoint work. Flip it up and you can drive solvent right into gas ports, extractor channels, and other spots you can't reach with a brush. Flip it down and it stores the straw so you're not hunting for it next time. That little detail makes a real difference when you're working through a dirty bolt group.
Where the Foul-Out Gunk Blaster Really Earns Its Keep
This stuff shines on the parts that give everyone the most grief. Chambers, actions, trigger and bolt groups, slides, choke tube threading, semi-auto gas ports, extractors, and ejectors all clean up quick. It's a gun-metal grade solvent, so it's plenty aggressive on fouling, but it's also formulated to be safe on polymer frames and finishes. That means you can hose down a striker-fired pistol or a polymer-framed rifle without second-guessing it.
Getting the Best Results From Your Gunk Blaster
For a deep clean, pull the bottom action or trigger assembly and position the firearm so the solvent and loosened gunk drain out of the chamber instead of pooling inside. Short, controlled blasts do more than one long soak. Once it's clean, let it air out for a couple minutes, then follow up with a light coat of quality gun oil on the metal to guard against rust and wear. Do that and your gun runs smoother and cycles more reliably, plain and simple.
Key Specifications
- Manufacturer: Real Avid
- Model: Foul-Out Gunk Blaster
- Manufacturer Part Number: AVDCB12A
- UPC: 813119013294
- Product Type: Aerosol Cleaner / Degreaser
- Size: 12 oz
- Nozzle: Two-position flip-up spray and stream straw
- Surface Compatibility: Polymer safe and metal finishes
- Formula: Fast-evaporating, gun-metal grade solvent
- Removes: Carbon fouling, burnt powder, grease, oil
- Length: 8.55 in
What’s Included
- Real Avid Foul-Out Gunk Blaster 12 oz aerosol can with two-position flip-up nozzle
Frequently Asked Questions
Is the Foul-Out Gunk Blaster safe to use on polymer-framed guns?
Yes. Real Avid formulated this solvent to be polymer safe along with metal finishes, so you can use it on striker-fired pistols and polymer-framed rifles. It cuts through fouling aggressively without harming the frame or coatings. That makes it a solid do-it-all option for a mixed collection.
What does the two-position nozzle actually do?
The flip-up straw gives you two ways to spray. In the up position you get a tight, high-pressure stream for pinpoint cleaning inside actions, gas ports, and tight channels, and in the down position you get a wider spray plus it tucks the straw away for storage. It's a handy setup that keeps you from losing the little straw between cleanings.
Do I need to oil my gun after using the Gunk Blaster?
You should. This is a degreaser, so it strips away oil along with the fouling and leaves metal bare. After cleaning, let the parts air out for a couple minutes, then apply a thin coat of gun oil to the metal surfaces to protect against rust and wear.
Will one can handle a full deep clean?
For most cleanings a 12 oz can goes a long way since short, controlled blasts do the job better than long soaking sprays. For a thorough deep clean, remove the bottom action or trigger assembly first and position the firearm so the solvent and loosened gunk flush out of the chamber. Used that way, a single can lasts through plenty of cleaning sessions.




Reviews
There are no reviews yet.