0
0

RCBS X-Die Small Base Sizer Die .223 Rem – Trim Once, Load More

UPC: 076683388599

$63.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever gotten tired of trimming .223 brass every few firings, the RCBS X-Die Small Base Sizer is the fix. It's a full-length sizer built with RCBS's patented X-Die mandrel, which has an expander ball and decapping pin attached so you size, deprime, and set the neck in one pull of the handle. The real draw is case growth control. After you trim your brass once (about .020 inch off the max length to get everything standardized), the mandrel stops the case mouth from thickening and runaway stretching the way it would in a standard die. Cases grow a few thousandths at first, then settle in below max length and stay there, so repeated trimming becomes a thing of the past.

What Makes the X-Die Small Base Sizer Different

The trick is the tight tolerance between the mandrel and the inside of the die neck. Because that gap is so close, brass doesn't have anywhere to flow and thicken during sizing. That's a big deal if you run a volume loading setup and hate babysitting case length. Reloaders who've used it tend to sum it up the same way: it does exactly what it's built to do, and you trim a lot less.

Why Small Base for .223 Loaders

This is a small base die, which means it sizes the case body a touch smaller in diameter and bumps the shoulder back a bit more than a standard full-length die. That extra sizing is what you want for AR-15s, other semi-autos, pump, slide, and some lever guns where reliable chambering matters more than squeezing out every last bit of case life. If you're loading strictly for a bolt gun, a standard full-length die is usually the better call, but for gas guns this is the ticket to feeding that just works.

Keep in mind this is the sizer die on its own, so you'll pair it with a seater die to finish your loads. It threads into any standard 7/8-14 press, and you'll need the correct shellholder, which is sold separately.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .223 Remington
  • Die Type: Full Length Small Base Sizer Die (X-Die)
  • Thread: 7/8-14
  • Material: Steel
  • Finish: Silver
  • Manufacturer Part Number: 38859
  • UPC: 076683388599
  • Country of Origin: USA

What’s Included

  • RCBS X-Die Small Base Sizer Die (.223 Rem)
  • Mandrel with attached expander ball and decapping pin

Frequently Asked Questions

Does the RCBS X-Die Small Base Sizer really mean I stop trimming?

Pretty much. You trim your brass one time to standardize it, roughly .020 inch off the maximum case length. After that the mandrel controls growth so the cases stabilize below max length, and repeated trimming is no longer needed for normal loading.

Is this X-Die a complete reloading die set?

No, this is the sizer die only. You'll need to add a seater die to load finished rounds. If you're just getting started in .223, RCBS also offers an X-Die Small Base Set that pairs this sizer with a standard seater die.

Why choose a small base sizer over a standard full-length die for .223?

A small base die sizes the case body slightly smaller and sets the shoulder back a bit more, which helps rounds chamber and feed reliably in AR-15s and other semi-autos, pumps, slides, and some lever guns. For bolt-action rifles, a standard full-length die is generally the better choice to maximize case life.

Does the RCBS X-Die Small Base Sizer come with a shellholder?

No, the shellholder is sold separately. You'll need the correct RCBS shellholder for .223 Remington to run cases in the die. It threads into any standard 7/8-14 reloading press.

Additional information

UPC

076683388599

Manufacturer

Manufacturer Part Number

38859

Shipping Weight

1.5

Reviews

There are no reviews yet.

Be the first to review “RCBS X-Die Small Base Sizer Die .223 Rem – Trim Once, Load More”