0
0

RCBS X-Die Small Base 2-Die Set .308 Win – Trim Once, Done

UPC: 076683392626

$73.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Case trimming is the chore every .308 reloader learns to hate, and the RCBS X-Die Small Base 2-Die Set is built to put an end to it. Instead of measuring and shaving brass after every firing, you do one initial full-length size and trim, then let the die do the rest. The X-Sizer looks like a standard full-length die from the outside, but inside sits a specially designed mandrel with an expander ball and decapping pin attached. As the case mouth contacts that mandrel during sizing, it slows the growth rate so your brass stabilizes just under maximum length instead of creeping past it.

Why the Small Base Matters on the X-Die .308 Set

The small base sizer squeezes the case body from the shoulder down to the head a couple thousandths smaller than a standard full-length die. That extra bit of sizing is exactly what you want when you're loading for autoloaders, semi-autos, and lever guns, where sloppy chambering or sticky extraction can turn into a real headache. If you run an M1A, AR-10, or any .308 that's rough on brass, this set gives you rounds that drop in and pull out without a fight.

Getting the Most From Your X-Die Small Base Set

The one catch worth knowing up front is the setup. You full-length size your brass, trim to .020 inch under maximum case length, then set the mandrel against the case mouth before running the lot through again. Skip that trim-to-length step and the die won't do its job. Nail it, and reloaders report running the same brass through several firings with no further trimming and no loss of accuracy. Because the tolerance between the mandrel and die neck wall is so tight, the neck wall doesn't thicken as case length gets pushed back, so you avoid the doughnut and over-thick necks that plague some sizing setups.

This is the set to grab if you're new to loading .308 with X-Dies, since it pairs the X-Sizer with a standard seater so you've got everything needed to build a complete round right out of the box.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .308 Winchester
  • Die Type: Small Base Full-Length X-Sizer and Standard Seater
  • Number of Dies: 2
  • Thread: 7/8-14
  • Material: Steel
  • Best For: Semi-auto, auto, and lever-action rifles
  • Initial Trim Spec: .020 inch under maximum case length
  • Country of Origin: USA
  • MPN: 39262
  • Model Number: 39262
  • UPC: 076683392626
  • Shipping Weight: 1.2 lbs

What’s Included

  • Small Base X-Sizer Die with mandrel, expander ball, and decapping pin
  • Standard bullet seater die
  • Instruction sheet

Frequently Asked Questions

How is the X-Die Small Base Set different from a regular .308 die set?

The X-Sizer die uses a specially designed mandrel that contacts the case mouth during sizing to slow case growth, which means you trim once and generally don't trim again for that lot of brass. The small base portion also sizes the case body a couple thousandths smaller than a standard full-length die. That combination is aimed at reliable feeding and easy extraction, especially in semi-autos.

Do I really only have to trim my .308 brass one time?

After the initial prep, yes, for a good run of firings. The process is to full-length size your cases, trim to .020 inch under maximum case length, then set the mandrel and run the lot through again. From there the mandrel limits growth so cases settle just below max length, and many reloaders go several firings before any case needs trimming.

Will this set work for my M1A or AR-10?

That's exactly what the small base design is for. Semi-autos and other hard-cycling actions can leave brass with case head expansion that a standard die doesn't fully address, and the small base sizer brings those dimensions back in line for smooth chambering. It's a popular choice among folks loading for the M1A, AR-10, and similar .308 platforms.

Is this X-Die set a good choice if I'm new to reloading .308?

It is. RCBS recommends this exact two-die set for anyone just getting started loading a caliber, since it pairs the X-Die Small Base Sizer with a standard seater die. You get everything needed to size and seat a complete round, with the bonus of cutting way down on case trimming once the die is set up correctly.

Additional information

UPC

076683392626

Manufacturer

Manufacturer Part Number

39262

Shipping Weight

1.2

Reviews

There are no reviews yet.

Be the first to review “RCBS X-Die Small Base 2-Die Set .308 Win – Trim Once, Done”