Description
The RCBS X-Die Small Base Die Set for .223 Remington solves two headaches at once: endless case trimming and finicky feeding in gas guns. The star of the set is the patented X-Die sizer, which uses a specially designed mandrel with the expander ball and decapping pin built right in. After an initial trim of about .020 inch off the maximum case length, that mandrel contacts the case mouth during sizing and slows down the growth that normally forces you back to the trimmer every few firings. Cases will creep up a few thousandths at first, then settle in below max length and hold steady with no real loss in accuracy or case life.
What the Small Base Part Actually Does
The small base feature is where this set earns its keep for semi-auto reloaders. A small base sizer squeezes the case body and base down a few thousandths tighter than a standard full-length die, pushing dimensions slightly below SAAMI minimum. That extra margin is what keeps rounds chambering cleanly in AR-15s, AR-10s, and other semi-autos, pumps, and lever guns that tend to run tighter chambers and lack the camming power of a bolt gun. If you've ever had a sized round hang up a quarter inch out of a hot, dirty chamber, this is the fix.
Inside the RCBS X-Die .223 Set
This is a two-die set that includes the X-Die small base full length sizer and a standard seater die, packed in the familiar green RCBS die box. RCBS points new reloaders toward this exact pairing when starting out in a caliber. Keep in mind you'll need the correct shellholder, which is sold separately.
A Note on Brass Life
Small base sizing does work the brass a bit harder than standard full-length sizing, which is the tradeoff for that bulletproof feeding. For most AR shooters chasing reliability in rapid-fire strings or running mixed-headstamp range brass, it's a trade worth making. The X-Die design helps offset the wear by cutting down the repeated trimming and mouth contact that shortens case life on its own.
Key Specifications
- Manufacturer: RCBS
- Caliber: .223 Remington
- Die Style: Small Base X-Die Set
- Set Type: 2-Die Set (Sizer and Seater)
- Sizer Type: X-Die Small Base Full Length Sizer
- Decapping: Decapping pin and expander ball on mandrel
- Material: Steel
- Intended Use: Semi-auto, pump, and lever-action rifles
- Country of Origin: USA
- Manufacturer Part Number: 38862
- UPC: 076683388629
- Shipping Weight: 0.75 lb
What’s Included
- X-Die Small Base Full Length Sizer Die
- Standard Seater Die
- RCBS die storage box
Frequently Asked Questions
Do I need the small base version of the X-Die for my AR-15?
It depends on your chamber. Small base dies size the case body and base a few thousandths tighter than standard full-length dies, which helps rounds chamber and extract cleanly in semi-autos, pumps, and lever guns that run tighter chambers or lack the camming power of a bolt gun. If you reload mixed range brass or want insurance against a round hanging up in a hot, dirty chamber, the small base X-Die is the way to go.
Does the RCBS X-Die really mean I never have to trim .223 brass again?
The X-Die is built to minimize trimming, not eliminate it entirely from day one. You trim about .020 inch off the maximum case length once to standardize your brass, then the specially designed mandrel contacts the case mouth during sizing to slow down case growth. Cases will grow a few thousandths at first and then stabilize below max length, so repeated trimming is no longer necessary.
What's included in this RCBS X-Die .223 set, and do I need a shellholder?
This is a two-die set with the X-Die small base full length sizer and a standard seater die, packed in an RCBS die box. The sizer has the decapping pin and expander ball built into the mandrel. A shellholder is not included and is sold separately, so make sure you have the correct one for .223 Remington.
Will the small base X-Die wear out my brass faster?
Small base sizing does work the brass a little harder than standard full-length sizing because it squeezes the base down more. That's the tradeoff for more reliable feeding in semi-autos. The X-Die design helps offset this by cutting down on the repeated trimming and case mouth stress that shorten brass life, and RCBS notes cases sized in it hold up with no discernible loss in case life once they stabilize.




Reviews
There are no reviews yet.