Description
If you load .300 Win Mag and you're tired of pulling cases out of the chamber only to trim them again every other firing, the RCBS X Die Full Length Die Set is built to fix exactly that headache. The magnum case runs at high pressure and it likes to flow forward with every resize, which means a lot of trimming over the life of your brass. This set tackles that at the source instead of just reacting to it after the fact.
What Makes the X Die Different
The heart of this set is the X Die sizer and its proprietary mandrel. In a standard full length sizer, nothing stops the brass as it flows forward during resizing, so the case keeps growing. The X Die's mandrel acts as a physical stop at the case mouth. It doesn't shorten your brass, it slows the rate the case grows. You do an initial trim of about .020 inch under max case length to standardize everything, and from there the mandrel does the heavy lifting of keeping growth in check. Thanks to the tight tolerance between the mandrel and the die's neck wall, the neck doesn't thicken as the case gets pushed back.
Setting Up the .300 Win Mag X Die Right
The mandrel carries the expander ball and decapping pin, same as a conventional sizer, so decapping and resizing happen in one stroke. A couple of things make a big difference with these dies: trim every case in your lot to that .020 under max number before you set the die, and give the inside of the case mouth a light touch of lube so the mandrel glides and the expander pulls through clean. Cases run repeatedly through the X Die will creep up a few thousandths at first, then settle in and hold below max with no real loss in accuracy or case life.
Trusted RCBS Build
RCBS has been making reloading gear for decades and this set is made in the USA. The sizer and the standard seater die thread into any press using standard 7/8-14 die threads, so it drops right into your existing setup. For high-volume .300 Win Mag loaders chasing longer brass life, this is a smart piece to have on the bench.
Key Specifications
- Manufacturer: RCBS
- Caliber: .300 Winchester Magnum
- Die Type: Full Length X Die Set (Rifle)
- Pieces: 2-Die Set
- Manufacturer Part Number: 38912
- UPC: 076683389121
- Thread: 7/8-14 Standard
- Material: Steel
- Country of Origin: USA
- Shipping Weight: 1.32 lbs
What’s Included
- RCBS X Die Full Length Sizer Die (with mandrel, expander ball, and decapping pin)
- Standard Bullet Seater Die
Frequently Asked Questions
How does the RCBS X Die actually cut down on trimming for .300 Win Mag?
Inside the sizer is a special mandrel that the case mouth contacts during resizing. Instead of letting the brass flow forward unchecked like a standard full length die, the mandrel acts as a stop and slows the growth rate. You trim once to about .020 inch under max case length to standardize the lot, and after that the mandrel keeps the brass in check so you're not back at the trimmer every firing.
Does the X Die set come with everything I need, or do I need extra dies?
The set includes the X Die full length sizer and a standard bullet seater die, which covers resizing, decapping, and seating. If you already own a regular die set for .300 Win Mag, RCBS also sells the X Die sizer on its own so you don't have to buy a duplicate seater. For most folks starting fresh, the complete set has you covered.
Do I need to lube the inside of the case necks with the X Die?
A light touch of lube inside the case mouth helps the mandrel and expander ball pull through smoothly and keeps case lengths uniform. Many reloaders use a neck brush with a little case lube or a dab of sizing wax. Just keep the shoulder clear of excess lube to avoid denting, and you're good to go.
Will cases sized in the .300 Win Mag X Die lose accuracy or case life over time?
No. Cases run repeatedly through the X Die typically grow a few thousandths at first, then stabilize below the maximum case length. RCBS reports no discernible loss of accuracy or case life, and many magnum loaders find they get noticeably more firings per case compared to conventional dies.





Reviews
There are no reviews yet.