0
0

RCBS X Die Full Length Die Set .270 Win – 2 Die Set, 37512

UPC: 076683375124

$73.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS X Die Full Length Die Set for .270 Winchester is built around one simple idea that saves reloaders a ton of prep work: trim your brass once, then quit chasing case length after every firing. Instead of a standard sizer, this set uses the patented X Die mandrel, which contacts the case mouth during resizing to control how fast the brass stretches. After an initial trim of about .020 inch off maximum case length, your cases grow a few thousandths and then level off below max, so the constant trim-measure-trim cycle mostly disappears.

How the .270 Win X Die Earns Its Keep

What sets this apart from a regular full length set is that close tolerance between the mandrel and the die neck wall. As the case shoulder gets pushed back, the neck wall doesn't thicken the way it can with conventional sizing, and cases hold up well over repeated loadings with no real loss in accuracy or case life. If you shoot a lot of .270 and hate living at the case trimmer, that is the whole appeal. The sizer carries an expander ball and decapping pin on the mandrel assembly, so you full length size, deprime, and set your neck tension in one pull of the handle.

What Comes in the RCBS X Die .270 Winchester Set

This is a two die set that includes the X Die full length sizer and a standard seating die. The seater adjusts bullet seating depth to your preferred overall length. Both dies use the industry standard 7/8-14 thread, so they drop right into single stage, turret, and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and others. Everything is machined in the USA and backed by the RCBS limited lifetime warranty for the original owner.

A quick note worth knowing before you order: the shell holder is not included, so grab the correct one for the .270 Winchester case head if you don't already have it on the bench.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .270 Winchester
  • Die Type: X Die Full Length Sizer and Standard Seater
  • Number of Dies: 2
  • Thread Size: 7/8-14
  • Material: Steel
  • Shell Holder Included: No
  • Country of Origin: USA
  • Warranty: RCBS Limited Lifetime Warranty
  • Manufacturer Part Number: 37512
  • UPC: 076683375124

What’s Included

  • RCBS X Die Full Length Sizer Die (with mandrel, expander ball, and decapping pin)
  • Standard Seater Die

Frequently Asked Questions

Does the RCBS X Die .270 Win set really let me stop trimming?

After you do an initial trim of about .020 inch off maximum case length, the X Die mandrel controls how much the brass grows during sizing. Cases will stretch a few thousandths at first and then stabilize below max length, which dramatically reduces or eliminates future trimming. You trim once to standardize the brass, and after that trimming is rarely needed.

What comes in the RCBS X Die Full Length Die Set for .270 Winchester?

It is a two die set that includes the X Die full length sizer and a standard seater die. The sizer handles resizing, depriming, and neck expansion thanks to the mandrel with its expander ball and decapping pin. The seater sets your bullet seating depth to your desired overall length.

Is a shell holder included with this .270 Win die set?

No, the shell holder is not included. You will need the correct RCBS shell holder for the .270 Winchester case head, which shares the same head size as several other common cartridges. If you already reload .270 or a cartridge on the same case, there is a good chance you have the right one on hand.

Will these RCBS dies fit my press?

Yes. The dies use the industry standard 7/8-14 thread that fits nearly all single stage, turret, and progressive presses, including those from RCBS, Hornady, Lee, Lyman, Redding, and Dillon. That thread standard was originally established by RCBS and is now used across the industry.

Additional information

UPC

076683375124

Manufacturer

Manufacturer Part Number

37512

Shipping Weight

1.35

Reviews

There are no reviews yet.

Be the first to review “RCBS X Die Full Length Die Set .270 Win – 2 Die Set, 37512”