0
0

RCBS X Die Full Length Die Set .25-06 Rem 2-Die Set

UPC: 076683389626

$73.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS X Die Full Length Die Set for .25-06 Rem takes aim at the part of reloading nobody enjoys: endless case trimming. This two-die set pairs an X Die full length sizer with a standard seater die, and the sizer carries a specially designed mandrel with an expander ball and decapping pin built right in. After you give your brass one initial trim of .020 inch off the maximum case length, the mandrel does the rest, keeping that stretch under control load after load.

How the X Die Changes Your .25-06 Rem Brass Prep

The magic here is in the mandrel. During sizing it makes contact with the case mouth, which slows down the rate at which the brass grows. Thanks to a very tight tolerance between the mandrel and the die neck wall, the neck doesn't thicken as the case gets pushed back during resizing. Cases run through the X Die repeatedly will stretch a few thousandths at first and then settle in below maximum length, with no noticeable drop in accuracy or case life. For anyone loading in volume, that adds up to a lot of saved bench time.

What You Get in the RCBS X Die .25-06 Set

This is a true full length sizing setup, bringing fired .25-06 brass back to proper dimensions so it chambers cleanly in any rifle. It's a smart pick for both bolt guns and semi-autos where reliable feeding matters. The dies use the standard 7/8-14 thread, so they drop into just about any single stage or progressive press on the market. Keep in mind a shell holder is not included, so if you're new to the .25-06 you'll want to grab the matching one.

Why Handloaders Reach for the X Die System

RCBS has been building reloading gear for decades, and the X Die line is one of their most popular answers to case stretch. If you already own a standard RCBS sizing die for the .25-06, you can buy just the X Die sizer on its own. For folks starting fresh, this complete set covers sizing and seating in one box and gets you loading quality .25-06 ammo right away.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .25-06 Remington
  • Type: Full Length X Die 2-Die Set
  • Dies Included: X Die Full Length Sizer and Standard Seater Die
  • Thread Size: 7/8-14
  • Shell Holder Included: No
  • Material: Steel
  • Country of Origin: USA
  • Manufacturer Part Number: 38962
  • UPC: 076683389626
  • Shipping Weight: 1.4 lbs

What’s Included

  • X Die Full Length Sizer Die with mandrel, expander ball, and decapping pin
  • Standard Bullet Seater Die

Frequently Asked Questions

How does the RCBS X Die reduce case trimming on .25-06 brass?

The sizer uses a specially designed mandrel that contacts the case mouth during sizing, which slows down how fast the brass grows. After one initial trim of .020 inch off the maximum case length, the cases stretch only a few thousandths and then stabilize below max length. That means you can skip the repeated trimming most full length dies require.

Does the X Die .25-06 set come with a shell holder?

No, a shell holder is not included with this set. You'll need the correct shell holder for the .25-06 Remington case head, which is the same one used by several other popular .30-06 based cartridges. If you're setting up for the .25-06 for the first time, plan to add one to your order.

What's in the box with this RCBS X Die Full Length Die Set?

You get two dies: the X Die full length sizer and a standard seater die. The sizer handles resizing, depriming, and expanding the neck, while the seater sets your bullet to depth. It's a complete sizing and seating package for the .25-06 Remington.

Will these dies fit my press?

Yes, the dies use the industry standard 7/8-14 thread, so they'll thread into virtually any single stage or progressive reloading press. That includes RCBS presses along with most other common brands. If you already own a standard RCBS .25-06 die set, you can also buy just the X Die sizer on its own.

Additional information

UPC

076683389626

Manufacturer

Manufacturer Part Number

38962

Shipping Weight

1.4

Reviews

There are no reviews yet.

Be the first to review “RCBS X Die Full Length Die Set .25-06 Rem 2-Die Set”