0
0

RCBS X-Die Full-Length Die Set .243 Win – Trim Once, Load On

UPC: 076683373120

$73.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a lot of .243 Win, you already know the chore that eats up bench time: trimming brass every single reload. The RCBS X-Die set tackles that head on. This two-die set uses a patented X-Die sizer with a specially designed mandrel that contacts the case mouth during sizing and slows down case growth, so after one initial trim you can skip the trimmer and get back to loading.

How the RCBS X-Die Sizer Earns Its Keep

The sizer looks like a standard full-length die from the outside, but the magic is in the mandrel, which carries the expander ball and decapping pin. You start by trimming your brass 0.020 inches below the maximum case length to standardize everything. From there, the mandrel reduces the rate at which cases stretch. Brass sized repeatedly in the X-Die will grow a few thousandths at first, then settle in and stabilize below max length with no noticeable loss in accuracy or case life. It does not shorten the case, and thanks to the tight tolerance between the mandrel and the die's neck wall, the neck wall will not thicken as the case gets pushed back.

What Comes in the .243 Win X-Die Set

Along with the X-Die full-length sizer, the set includes a standard seater die to get your bullets set to the depth you want. Both dies are built from RCBS die steel and use the common 7/8-14 thread, so they'll thread right into pretty much any standard single stage or progressive press you're running. Keep in mind the shellholder is sold separately, so grab the right one for the .243 case head if you don't already have it on the bench.

For anyone loading up the .243 for deer, varmints, or range work and burning through brass season after season, this is the kind of setup that pays you back in saved time every time you sit down to reload.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .243 Winchester
  • Set Type: X-Die Full-Length 2-Die Set
  • Dies Included: X-Die Full-Length Sizer & Seater Die
  • Thread: 7/8-14
  • Material: Die Steel
  • Case Type: Bottleneck Rifle
  • Shellholder: Sold separately
  • Manufacturer Part Number: 37312
  • UPC: 076683373120

What’s Included

  • X-Die Full-Length Sizer Die
  • Standard Seater Die
  • Plastic storage case
  • Instructions

Frequently Asked Questions

Does the RCBS X-Die mean I never have to trim .243 brass again?

Close to it. You still make one initial trim, taking 0.020 inches off the maximum case length to standardize your brass. After that, the mandrel slows case growth so brass stabilizes below max length and you can skip repeated trimming on future reloads.

Is a shellholder included with this X-Die set?

No, the shellholder is sold separately with this set. You'll need the correct shellholder for the .243 Winchester case head to use the dies in your press. If you already reload similar cartridges, there's a good chance you have the right one on hand.

Will the RCBS X-Die fit my reloading press?

Yes, the dies use the standard 7/8-14 thread, which is the industry-standard sizing. That makes them compatible with most common single stage and progressive presses on the market.

Does the X-Die shorten my cases during sizing?

No, the X-Die does not shorten the case length. The mandrel contacts the case mouth during sizing to reduce the rate at which the brass grows, and the tight tolerance between the mandrel and neck wall keeps the neck from thickening as the case is pushed back.

Additional information

UPC

076683373120

Manufacturer

Manufacturer Part Number

37312

Shipping Weight

1.25

Reviews

There are no reviews yet.

Be the first to review “RCBS X-Die Full-Length Die Set .243 Win – Trim Once, Load On”