Description
If you're loading VLD or boat-tail bullets, a standard chamfer just doesn't cut it the way this one does. The RCBS VLD Deburring Tool runs a 22-degree cutting angle instead of the usual steeper taper, which opens up the case mouth gently enough that the bullet slides in without the edge shaving or marring the boat-tail base. That shaved base is one of those small things that quietly eats into your group size, and this tool is designed to keep it from happening in the first place.
What the RCBS VLD Deburring Tool Does on the Bench
The shallow angle lets the cutting edge fully engage the inside of the case mouth, leaving a clean, round, consistent chamfer across every piece of brass you run through it. That consistency is what makes bullet seating smooth and repeatable, and it's a big reason precision reloaders reach for the VLD-specific tool over a general-purpose deburring head. It handles cases from .17 all the way up to .45 caliber, so one tool covers just about everything on a typical reloading bench.
Handle and Compatibility of the VLD Deburring Tool
The cutter itself is knurled steel and comes mounted to a molded accessory handle that gives you a solid, comfortable grip for hand use. If you'd rather speed things up, the head is also compatible with the RCBS Trim Mate Case Prep Center, so you can power through larger batches without wearing out your fingers. You can run it by hand for a quick touch-up or mount it to the prep station when you're prepping brass in volume.
For anyone working up accurate loads with sleek, high-BC projectiles, this is one of those inexpensive tools that punches well above its weight. It's a simple piece of gear, but getting a clean chamfer matched to the bullet style you're shooting makes a real difference downrange.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9352
- UPC: 076683093523
- Tool Type: VLD Case Mouth Deburring / Chamfer Tool
- Cutting Angle: 22 Degrees
- Caliber Range: .17 to .45 Caliber
- Cutter Material: Knurled Steel
- Handle: Molded Ergonomic Accessory Handle (Included)
- Compatibility: RCBS Trim Mate Case Prep Center
- Color: Green
- Country of Origin: USA
- Quantity: 1 Each
- Shipping Weight: 0.15 lbs
What’s Included
- RCBS VLD Deburring Tool head (22-degree, knurled steel)
- Molded ergonomic accessory handle
Frequently Asked Questions
What makes the RCBS VLD Deburring Tool different from a standard deburring tool?
The big difference is the cutting angle. A standard deburring tool uses a steeper taper, while the VLD tool cuts a shallow 22-degree chamfer that matches the longer, sleeker profile of VLD and boat-tail bullets. That lets the bullet seat into the case without the mouth shaving or damaging the base, which helps protect accuracy.
Can the RCBS VLD Deburring Tool be used with the Trim Mate Case Prep Center?
Yes. The cutting head is compatible with the RCBS Trim Mate Case Prep Center, so you can mount it up and power through larger batches of brass. It also works great by hand using the included accessory handle for quick jobs or smaller runs.
What calibers does this VLD deburring tool cover?
It handles case mouths from .17 all the way up to .45 caliber. That range covers the vast majority of common rifle and handgun brass, so one tool takes care of most of what you'll see on the bench.
Do I need a VLD chamfer tool if I only shoot flat-base bullets?
Not necessarily. The VLD angle really shines with boat-tail and Very Low Drag bullets where protecting the base matters most. If you're loading mostly flat-base bullets a standard chamfer tool works fine, but if you shoot both, this tool gives you cleaner seating on the long-range stuff.




Reviews
There are no reviews yet.