$100.99
28 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The RCBS Uniflow-III is the latest and most refined version of a powder measure that's been a reloading bench staple for decades. RCBS machined the reference surfaces to exacting tolerances so powder pours uniformly out of the metering cylinder and drops into the case the same way every single pull. That kind of repeatability is what separates a good measure from a frustrating one, and it covers a wide span of charges from 0.5 all the way up to 95 grains with 0.1 to 0.3 grain accuracy.
The big upgrade here is versatility. Earlier Uniflow measures often meant swapping rotors and cylinders when you jumped between small pistol charges and heavier rifle loads. The Uniflow-III uses a single metering cylinder and rotor that handles the whole range, so a reloader running 9mm one day and a .30 caliber rifle the next doesn't need extra parts on the bench. It handles the three major powder types too, including ball, extruded, and flake.
The hopper is NG-resistant and anti-static, which keeps fine grains from clinging to the walls and throwing off your flow. It holds a solid amount of powder for long sessions, and the threaded design is the real convenience feature. When it's time to change powders or clean up, the hopper simply unscrews so you can empty and wipe everything down in a couple of minutes instead of fighting with it.
One thing worth knowing: this is a volumetric throw-and-check measure, not a dispenser that weighs for you. RCBS recommends pairing it with a good scale to set your initial charge and spot check as you go, which is standard practice for any manual measure. It mounts to a bench with a standard 7/8-14 thread and comes backed by the RCBS limited lifetime warranty. For handloaders who like the feel and speed of throwing charges by hand, this is about as consistent as a mechanical measure gets without jumping to a digital dispenser. Note that it is built for modern smokeless powders and is not intended for black powder.
No. One of the standout upgrades on the Uniflow-III is that a single metering cylinder and rotor covers the full 0.5 to 95 grain range. That means you can load light pistol charges and heavier rifle charges without swapping out any extra parts.
It does not. The Uniflow-III is a mechanical, volumetric measure that throws charges by volume rather than weight. RCBS recommends using it alongside an accurate powder scale to set your original charge and to spot check throws during a loading run.
It uses a standard 7/8-14 thread and comes with a stand plate, so it bolts right onto most reloading benches. That common thread size also means it works with aftermarket powder measure stands if you want to raise it up for better clearance under the drop tube.
No, it is designed for modern smokeless powders only and is not intended for black powder. It handles ball, extruded, and flake smokeless powders, and the NG-resistant anti-static hopper helps those fine grains flow smoothly instead of clinging to the walls.
| UPC | 604544621181 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 9016 |
| Length | 12.2500 |
| Shipping Weight | 3.27 |
You must be logged in to post a review.
Reviews
There are no reviews yet.