Description
This is the standalone taper crimp seater die from RCBS, built for folks loading 9mm Luger and the related 9×21 and 9×23 chamberings. It handles two jobs at once: it seats your bullet to the depth you set, then gently squeezes the case mouth around it to form a proper taper crimp. For semi-auto rounds like 9mm that headspace on the case mouth, that taper is exactly what you want, since it holds the bullet in place without biting into it or messing with your overall length.
What the RCBS Taper Crimp Seater Die Does on the Bench
The crimp feature is machined right into the die body, so you adjust the whole die up or down to dial in your crimp, then set the seater plug for depth. A taper crimp works by tightening gradually toward the case mouth, which removes the flare from your expander step and keeps the round feeding smoothly through a magazine. That matters when you're running a pistol hard and want every round to chamber the same way.
Fit, Finish, and the Long Game
Like the rest of the RCBS die lineup, this one is machined to tight tolerances, hardened, and hand finished before it leaves the factory. It uses the standard 7/8-14 thread, so it drops into any common single stage or progressive press, and it takes a standard shellholder for 9mm. The seater plug and lock rings are fully serviceable, and if you ever run a bullet profile the standard plug doesn't love, RCBS will fit an alternate stem.
Why Reloaders Keep Reaching for RCBS
RCBS has been a benchmark name in handloading gear for decades, and the reputation holds up for a reason. This die is made in the USA and carries the RCBS limited lifetime warranty to the original owner, so a defect in materials or workmanship gets repaired, replaced, or refunded. Pair it with a sizing die and an expander and you've got the backbone of a clean, repeatable 9mm loading setup.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 20562
- UPC: 076683205629
- Die Group: Group B – Popular Pistol Calibers
- Cartridge: 9mm Luger (also 9×21 / 9×23)
- Die Type: Taper Crimp Seater Die
- Crimp Style: Taper
- Function: Seats bullet and applies taper crimp in one step
- Thread Size: 7/8-14
- Material: Hardened steel, machined and hand finished
- Country of Origin: Made in USA
- Warranty: RCBS Limited Lifetime Warranty
- Shipping Weight: 0.6938 lbs
What’s Included
- RCBS Taper Crimp Seater Die (9mm Luger)
- Bullet seater plug
- Lock ring
- Instructions
Frequently Asked Questions
Is this RCBS Taper Crimp Seater Die a full die set or just the seater?
This is the seater die only, not a complete set. It seats the bullet and applies the taper crimp in one step, but you'll still need a sizing/decapping die and an expander die to load start to finish. It's a great pick if you're replacing a seater or adding a taper crimp option to an existing 9mm setup.
What cartridges does this 9mm Luger die work with?
It's set up for 9mm Luger and also handles the closely related 9×21 and 9×23 chamberings when used with the correct shellholder. You'll want a standard 9mm shellholder and any press with common 7/8-14 die threads.
Why choose a taper crimp instead of a roll crimp for 9mm?
9mm Luger headspaces on the case mouth, so you don't want a roll crimp curling that mouth inward. A taper crimp gently tightens the case around the bullet and removes the case flare without affecting overall length, which keeps rounds feeding and chambering reliably in a semi-auto. Roll crimps are better suited to revolver cartridges that headspace on the rim.
Does the RCBS die come with a warranty?
Yes. RCBS dies carry a limited lifetime warranty to the original owner, so if the die fails due to a defect in materials or workmanship, RCBS will repair, replace, or refund it. The seater plug and lock rings are also fully serviceable and replaceable if you ever need parts.



Reviews
There are no reviews yet.