0
0

RCBS Stuck Case Remover Kit — Multi-Caliber Reloading Die Tool

UPC: 076683093400

$24.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Every reloader who runs enough brass will eventually leave one stuck in a sizer die, usually because the lube ran thin at the wrong moment. The RCBS Stuck Case Remover Kit is the tool that saves the day when it happens. Rather than fighting the case or risking damage to an expensive die, this kit uses a controlled two-step process that pulls the case straight back out and gets you back to loading.

The method is refreshingly low-tech and dependable. You back off the expander-decapping rod so the pin clears the flash hole, secure the die in a vise, then drill the case head with the included bit and run the tap into the fresh hole. Thread the cap screw through the remover body, tighten it down against the die, and the case backs right out. It sounds fiddly on paper, but most folks get it done in a few minutes the first time, and faster after that.

What the RCBS Stuck Case Remover Kit Brings to the Bench

This is a universal tool, not caliber-specific, so it works with any brand of standard sizer die rather than just RCBS. The kit ships with everything needed to do the job the first time: the remover body, drill bit, tap, cap screw, and hex wrench. The one thing worth grabbing separately is a basic tap handle, since that isn't part of the package and turning the tap by hand is a whole lot easier with one. Any inexpensive die tap handle will do the trick.

Why Reloaders Keep the RCBS Stuck Case Remover Nearby

Made in the USA, this is one of those bench tools you buy once and hope you rarely need. When you do need it, though, there's no substitute. Feedback from reloaders is consistent: it works exactly as described, following the instructions or the RCBS video makes it painless, and it saves a good die from the trash. Toss it in your reloading drawer and it'll be waiting the day a case decides to stay put.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 9340
  • UPC: 076683093400
  • Product Type: Stuck Case Remover
  • Caliber/Gauge: Multi-Caliber / Universal
  • Compatibility: Any brand of standard sizer die
  • Removal Process: Two-step drill and tap
  • Color: Silver
  • Length: 4.5 in
  • Country of Origin: Made in USA
  • Quantity: 1

What’s Included

  • Stuck case remover body
  • Drill bit
  • Tap
  • Cap screw
  • Hex wrench

Frequently Asked Questions

How does the RCBS Stuck Case Remover work?

You back off the expander-decapping rod so the pin clears the flash hole, then clamp the die in a vise and drill the case head with the included bit. Next you run the tap into that hole, thread the cap screw through the remover body, and tighten it against the die to draw the case out. It's a two-step process that most people finish in just a few minutes.

Does this kit work with dies from brands other than RCBS?

Yes. The Stuck Case Remover is a universal tool built to work with any brand of standard sizer die, not just RCBS. That makes it a smart single solution no matter what dies are on your bench.

Do I need any tools that aren't in the kit?

The kit includes the drill bit, tap, cap screw, hex wrench, and remover body, so you have the core pieces covered. You'll want a basic tap handle to turn the tap, since that isn't included, and any inexpensive die tap handle works fine. A vise to hold the die and a drill to run the bit round out what you'll need.

Is the RCBS Stuck Case Remover only for one caliber?

No, this is a multi-caliber tool. Because it works off the case head and flash hole with a drill and tap, it isn't tied to a specific cartridge and handles the range of cases that fit standard sizer dies.

Additional information

UPC

076683093400

Manufacturer

Manufacturer Part Number

9340

Caliber/Gauge

Multi-Caliber

Color

Silver

Length

4.5000

Product Type

Stuck Case Remover

Quantity

1

Shipping Weight

0.2938

Reviews

There are no reviews yet.

Be the first to review “RCBS Stuck Case Remover Kit — Multi-Caliber Reloading Die Tool”